OptiFiber® Pro OTDR
Built for the Enterprise
OptiFiber Pro is the first OTDR built from the ground up for enterprise fiber optic cabling testing. OptiFiber Pro is focused on reducing costs while enhancing productivity and improving network reliability.
- First OTDR with a smartphone user-interface
- Industry's shortest event and attenuation dead zones
- Accelerate fiber certification with the fastest set-up and trace times
- SmartLoop™ technology enables the testing of two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
- Instantaneous bi-directional averaging results included at no charge
- Improve resource utilization with custom configurations for projects and users
- Simplify use with "DataCenter OTDR™" mode and EventMap™ view
- Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.
See Authorized Rental Partners
Read what customers are saying about OptiFiber® Pro OTDR
|
Request a Demo |
Try and Buy |
|
Product Configurator |
|
| Talk to an Expert | Where to Buy |
Overview
|
OptiFiber® Pro is the industry’s first OTDR built from the ground up to meet the challenges of enterprise fiber optic infrastructures. This troubleshooting and certification tool combines uncomplicated power, unparalleled efficiency and the exact functions needed for troubleshooting campus, data center and storage fiber networks. The OptiFiber® Pro OTDR elevates fiber optic testing with the industry’s only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable testing of fiber patchcords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool. SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end. |
"The Versiv tester has increased our technicians’ productivity in the field allowing for easy setup and faster testing of cables. The ease of which we can download stored test results and leave the tester in the field has also contributed to their productivity. Using the same unit for copper and fiber testing keeps everyone familiar with the setup and testing procedures"
Bill Quinn, Estimator/Project Manager, GSI
|
Features
Smartphone User Interface
Most OTDRs are designed for a myriad of applications, causing the user interface to be difficult to navigate and interpret. OptiFiber Pro combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.
Advantages:
- Single-touch tap and swipe control for selecting and scrolling menu items
- Multi-touch pinch to zoom for easy magnification control on a graphical fiber trace
- Task-focused design to reduce back and forth navigation through screens
- Capacitive touchscreen eliminates the need to recalibrate unlike legacy touchscreens
- Context sensitive on-screen help that gives users additional details or problem resolution suggestions
Optimized for the Datacenter
Driven by server virtualization and multi-gigabit links between servers, networks and storage, the datacenter architecture employs more patch cords and dense topology connectors, rendering carrier-class OTDRs with long dead zones ineffective. OptiFiber Pro not only makes fiber deployment in datacenters possible, but provides the highest level of accuracy for quick problem resolution.
With a simple one-touch selection, users enter DataCenter OTDR mode - without setup time for fine-tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters - end-detection algorithms, pulse widths, etc - without getting confused by the short links or number of connectors.
Advantages:
- Ultra-short event and attenuation dead-zones precisely locates events and faults on fiber links
- DataCenter OTDR™ mode automatically sets the configuration to quickly test datacenter fiber
- The EventMap feature depicts fiber events in a way that requires no trace analysis expertise
SmartLoop OTDR
SmartLoop OTDR enables automated testing and analysis of two fibers in a single test while meeting standard's requirements. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables instant bi-directional averaged test results without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end. In addition to getting the job done quicker, SmartLoop meets the standard's requirements of leaving the launch and tail fibers in their initial locations during both bi-directional tests.
Test it right and test it fast with SmartLoop - included for free in all OptiFiber Pro modules.
Unique Certification with Flexibility and Efficiency
An important aspect in maximizing an OTDR’s value is to properly plan its day-to-day usage. With built-in project management, OptiFiber Pro allows a project manager to define each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certification and reporting.
OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project - defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.
Advantages:
- Full OTDR capability that certifies fiber performance based on job assignment for each operator
- Powerful project management facilitates OTDR sharing with clear job assignment for each operator
- Easy monitoring of job progress with pass/fail results
- On-screen report generation and upload to LinkWare™ application
Fiber Endface Inspection and Certification
OptiFiber Pro incorporates the FiberInspector Pro video inspection system which enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 1-second automated PASS/FAIL certification, per IEC 61300-3-35, eliminates human subjectivity and enables anyone to become a fiber inspection expert. Results can be saved in the certification report alongside OptiFiber Pro's OTDR results.
Other Key Features
Extremely short event and attenuation dead zone
The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area environments.
LinkWare™ management software
Leveraging the popular and multi-featured LinkWare cable test management software application, OptiFiber Pro users can easily access the hassle-free project management, report generation, and software upgrade capabilities to manage workflow and consolidate test results.
Two second trace per wavelength
Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap, Table or Trace. The end result is less time spent testing and more time performing other tasks.
On-screen help – corrective action
On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.
LinkWare™ Live Test Results Management Service
LinkWare Live is a cloud-based service that lets you manage certification jobs anytime, anywhere, with anyone on any device. With LinkWare Live, you can
- Keep track of every test on every job. Get an overview of every project from any smart device. Drill down to each individual test. Instantly receive notification of incorrect test setting or cable IDs.
- Get it right the first time. Define cable IDs and test settings from your PC or tablet. Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling.
- Keep your testers up to date. Standards can change without notice, and an out-of-date test report can mean hours of re-testing. LinkWare Live automatically ensures your testers are running the latest.
- Stop wasting time and gas driving testers back to the office. Integrated Wi-Fi allows you to upload your test results straight from the job site to LinkWare Live. Then download them automatically to the right job for fast report generation with LinkWare PC.
- Avoid Project Delays. Track the last used location and monitor the status of all testers to ensure they are always calibrated and running the latest firmware*
- Supports all Versiv models: DSX CableAnalyzer Series, CertiFiber Pro, OptiFiber Pro, and the FI-7000.
*See supported countries.
Models & Accessories
Models
| Model Number/Name | Description |
| OptiFiber Pro Models |
OptiFiber Pro models are available in 2 versions: wireless and non-wireless. The Wireless version includes includes integrated Wi-Fi for uploading results to LinkWare Live. The integrated Wi-FI is disabled in the non-wireless versions for customers who do not wish to receive Wi-Fi.
|
| OFP2-100-M |
OptiFiber Pro Multimode OTDR kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Multimode OTDR module, Shoulder Strap, USB Interface Cable, Versiv Open Source Software CD, AC Charger, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-100-M-NW |
Same configuration as the OFP2-100-M with integrated Wi-Fi disabled
|
| OFP2-100-MI |
OptiFiber Pro Multimode OTDR kit with inspection kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Multimode OTDR module, Shoulder Strap, USB Interface Cable, Versiv Open Source Software CD, AC Charger, (2) Quick Clean Cleaners (1.25/2.50 mm), (2) SC/LC Multimode Launch Cables—50 µm, (1) OTDR source port interchangeable LC adapters, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) Launch Fiber Hanging straps and magnets, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-100-S |
OptiFiber Pro Singlemode OTDR kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Singlemode OTDR module, Shoulder Strap, USB Interface Cable, Versiv Open Source Software CD, AC Charger, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-100-S-NW |
Same configuration as the OFP2-100-S with integrated Wi-Fi disabled.
|
| OFP2-100-SI |
OptiFiber Pro Singlemode OTDR kit with inspection kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Singlemode OTDR module, Shoulder Strap, USB Interface Cable, Versiv Open Source Software CD, AC Charger, (2) Quick Clean Cleaners (1.25/2.50 mm), (2) SC/LC Singlemode Launch Cables—50 µm, (1) OTDR source port interchangeable LC adapters, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) Launch Fiber Hanging straps and magnets, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-100-Q |
OptiFiber Pro Quad OTDR kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Quad OTDR module, Shoulder Strap, Carry Case, USB Interface Cable, Versiv Open Source Software CD, AC Charger, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-100-Q/GLD |
OFP2-100-Q with 1 year of Gold Support (available in the United States and Europe. Europe order: OFP2-100Q/GLD INT). |
| OFP2-100-Q-NW |
Same configuration as the OFP2-100-Q with integrated Wi-Fi disabled.
|
| OFP2-100-QI |
OptiFiber Pro Quad OTDR with inspection kit. This kit includes (1) Versiv Mainframe, (1) OptiFiber Pro Quad OTDR module, Shoulder Strap, Carry Case, USB Interface Cable, Versiv Open Source Software CD, AC Charger, (2) Quick Clean Cleaners (1.25/2.50 mm), (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cables—9 µm, (2) OTDR source port interchangeable LC adapters, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) Launch Fiber Hanging straps and magnets, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo
|
| OFP2-100-QI/GLD |
OFP2-100-QI with 1 year of Gold Support (available in the United States and Europe. Europe order: OFP2-100QI/GLD INT). |
| OFP2-CFP-QI |
OptiFiber Pro Quad OTDR and CertiFiber Pro Quad kit with inspection kit. This kit includes (1) Versiv Mainframe & Remote, (1) OptiFiber Pro Quad OTDR module, (2) CertiFiber Pro Quad OLTS modules, (2) HandStraps, (2) Shoulder Straps, (2) Carry Cases, USB Interface Cable, Versiv Open Source Software CD, (2) AC Chargers, (2) Quick Clean Cleaners (1.25/2.50 mm), (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cables—9 µm, (2) OTDR source port interchangeable LC adapters, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) LC/LC Simplex Adaptor, SC/LC SM TRC Kit 9 µm, TRC Carry Case, (2) Launch Fiber Hanging straps and magnets, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides. See Photo |
| OFP2-CFP-QI-NW |
Same configuration as the OFP2-CFP-QI-NW with integrated Wi-Fi disabled.
|
| OFP-Q-ADD |
OptiFiber Pro Add on Kit - includes OptiFiber Pro Quad OTDR Module, (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cable—9 µm, (2) OTDR source port interchangeable LC adapters, SC/SC Simplex Adaptor, LC/LC Simplex Adaptor, (2) Launch Fiber Hanging straps and magnets, Carry Case, Statement of Calibration and Getting Started Guide.See Photo |
| OFP-MM |
OptiFiber Pro Multimode OTDR module. See Photo |
| OFP-SM |
OptiFiber Pro Singlemode OTDR module See Photo |
| OFP-QUAD |
OptiFiber Pro Quad OTDR module See Photo |
| FI-1000-KIT |
A USB Fiber Inspection Video probe for Versiv products plus tip set (LC, FC/SC bulkhead, 1.25 and 2.5mm universal tips in a box). See Photo |
| VERSIV2-M |
Versiv 2 Main Replacement
|
Accessories
| Model Number/Name | Description |
| MMC-50-SCSC |
Multimode launch cable 50 µm SC/SC See Photo |
| MMC-50-SCLC |
Multimode launch cable 50 µm SC/LC See Photo |
| MMC-50-LCLC |
MULTIMODE LAUNCH CABLE 50µm LC/LC See Photo
|
| MMC-50-SCST |
Multimode launch cable 50 µm SC/ST See Photo
|
| MMC-50-STST |
MULTIMODE LAUNCH CABLE 50µm ST/ST See Photo
|
| MMC-50-SCFC |
Multimode launch cable 50 µm SC/FC See Photo
|
| MMC-50-FCFC |
MULTIMODE LAUNCH CABLE 50µm FC/FC See Photo
|
| MMC-50-SCE2K |
Multimode launch cable 50 µm SC/E2K See Photo |
| MMC-62-SCSC |
Multimode launch cable 62.5 µm SC/SC See Photo
|
| MMC-62-SCLC |
Multimode launch cable 62.5 µm SC/LC See Photo
|
| MMC-62.5-LCLC |
MULTIMODE LAUNCH CABLE 62.5µm LC/LC See Photo
|
| MMC-62-SCST |
Multimode launch cable 62.5 µm SC/ST See Photo
|
| MMC-62.5-STST |
MULTIMODE LAUNCH CABLE 62.5µm ST/ST See Photo
|
| MMC-62-SCFC |
Multimode launch cable 62.5 µm SC/FC See Photo
|
| MMC-62.5-FCFC |
MULTIMODE LAUNCH CABLE 62.5µm FC/FC See Photo
|
| SMC-9-SCSC |
Singlemode launch cable 9 µm SC/SC See Photo
|
| SMC-9-SCLC |
Singlemode launch cable 9 µm SC/LC See Photo
|
| SMC-9-LCLC |
SINGLEMODE LAUNCH CABLE 9µm LC/LC See Photo
|
| SMC-9-SCST |
Singlemode launch cable 9 µm SC/ST See Photo
|
| SMC-9-STST |
SINGLEMODE LAUNCH CABLE 9 µm ST/ST See Photo
|
| SMC-9-SCFC |
Singlemode launch cable 9 µm SC/FC See Photo
|
| SMC-9-FCFC |
SINGLEMODE LAUNCH CABLE 9 µm FC/FC See Photo
|
| SMC-9-SCE2KAPC |
Singlemode launch cable 9 µm SC/E2000 APC See Photo
|
| SMC-9-SCSCAPC |
Singlemode launch cable 9 µm SC/SCAPC See Photo
|
| SMC-9-SCFCAPC |
Singlemode launch cable 9 µm SC/FCAPC See Photo
|
| SMC-9-SCLCAPC |
Singlemode launch cable 9 µm SC/LCAPC See Photo
|
| MRC-50-SCSC-0.3m |
MM 50 µm TRC 0.3m for OTDR port (SC/SC)
|
| MRC-62.5-SCSC-0.3m |
MM 62.5µm TRC 0.3m for OTDR port (SC/SC)
|
| SRC-9-SCSC-0.3m |
SM 9µm TRC 0.3M for OTDR port (SC/SC)
|
| MRC-50-LCLC-0.3m |
MM 50µm TRC 0.3m for OTDR port (LC/LC)
|
| MRC-62.5-LCLC-0.3m |
MM 62.5µm TRC 0.3m for OTDR port (LC/LC)
|
| SRC-9-LCLC-0.3m |
SM 9µm TRC 0.3M for OTDR port (LC/LC)
|
| ADP-DuplexSC |
SC-SC duplex adapter
|
| ADP-DuplexLC |
LC-LC duplex adapter
|
| PA-SC |
OTDR source port interchangeable SC adapter
|
| PA-LC |
OTDR source port interchangeable LC adapter
|
| PA-ST |
OTDR source port interchangeable ST adapter
|
| PA-FC |
OTDR source port interchangeable FC adapter
|
| FI-1000 |
FI-1000 USB video probe for Versiv products
|
| FI1000-SCFC-TIP |
SC and FC bulkhead video probe tip. See Photo |
| FI1000-LC-TIP |
LC bulkhead video probe tip. See Photo |
| FI1000-EXND-LC-TIP |
Extended LC bulkhead video probe tip. See Photo |
| FI1000-ST-TIP |
ST bulkhead video probe tip. See Photo |
| FI1000-MU-TIP |
MU bulkhead video probe tip. See Photo |
| FI1000-E2KAPC-TIP |
E2000/APC bulkhead video probe tip. See Photo |
| FI1000-SCAPC-TIP |
SC/APC bulkhead video probe tip. See Photo |
| FI1000-E2K-TIP |
E2000 bulkhead video probe tip. See Photo |
| FI1000-LCAPC-TIP |
LC/APC bulkhead video probe tip. See Photo |
| FI1000-2.5-UTIP |
2.5 mm universal video probe tip for patch cords. See Photo |
| FI1000-1.25-UTIP |
1.25 mm universal video probe tip for patch cords
|
| FI1000-LC-PCTIP |
Video probe tip for LC simplex and duplex connectors. See Photo |
| FI1000-2.5APC-UTIP |
2.5 mm APC universal video probe tip for patch cord. See Photo |
| FI1000-MPO-UTIP |
MPO probe tip and translator knob for patch cords and bulkheads
|
| FI1000-MPO-XY-UTIP |
MPO probe tip and translator knob for multi-row patch cords and bulkheads
|
| FI1000-MPOAPC-UTIP |
MPO/APC probe tip and translator knob for patch cords and bulkheads. See Photo |
| FI1000-MPOAPC-XY |
MPO/APC probe tip and translator knob for multi-row patch cords and bulkheads. See Photo |
| FI1000-1.25APC-TIP |
1.25 mm APC universal video probe tip for patch cords. See Photo |
| FI1000-MPOAPC-RT |
MPO/MTP APC replacement tip with no translator knob
|
| FI1000-MPO-RT |
MPO/MTP replacement tip with no translator knob
|
| NFC-Kit-Case-E |
Enhanced Fiber Optic Cleaning Kit - Includes an Quick Clean 1.25mm cleaner, an Quick Clean 2.5mm cleaner, an Quick Clean MPO cleaner, a solvent pen, a cleaning cube and a softcase See Photo |
| VERSIV2-M |
VERSIV2 MAIN REPLACEMENT W/WIFI
|
| VERSIV2-RU |
VERSIV2 REMOTE REPLACEMENT
|
| VERSIV-TSET |
Versiv Headphones See Photo |
| VERSIV-BATTERY |
Versiv Battery See Photo |
| PWR-SPLY-30W |
30W Power Supply, 15V, 2A with US adapter. See Photo
|
| PWR-SPLY-30W INTL |
30W Power Supply, 15V, 2A with US, EU, AU, and UK adapters See Photo |
| PWR-SPLY-30W SA/IN |
30W Power Supply, 15V, 2A with US, South Africa and India adapters See Photo |
| PWR-SPLY-ADP |
EU, AU, UK adapters for 30W power supply. See Photo
|
| PWR-SPLY-ADP-SA |
South Africa and India adapters for 30W power supply See Photo |
| VERSIV-STRP |
Versiv Strap Kit See Photo |
| VERSIV-STND |
Versiv Demo Stand
|
| VERSIV-ADP-WIFI |
WiFi Adapter for Versiv Mainframe. (Available in the following countries.) |
| VERSIV-CASE3 |
VERSIV Hardsided Case See Photo |
| VERSIV-LG-CASE |
Versiv Large Carry Case See Photo |
| VERSIV-SM-CASE |
Versiv Small Carry Case. See Photo |
| VERSIV-BACKPK-STRP |
Backpack strap for Versiv Large Case See Photo |
| TFS-USB-CBL |
USB interface cable standard A to micro B
|
Specifications
Key OTDR specifications
| Multimode module | Singlemode module | Quad module | |
| Wavelengths | 850 nm +/- 10 nm 1300 nm +35/-15 nm | 1310 nm +/- 25 nm 1550 nm +/- 30 nm | 850 nm +/- 10 nm 1300 nm +35/-15 nm 1310 nm +/- 25 nm 1550 nm +/- 30 nm |
| Compatible fiber types | 50/125 µm 62.5/125 µm | Singlemode | 50/125 µm 62.5/125 µm Singlemode |
| Event dead zone 1 | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical | 1310 nm: 0.6 m typical 1550 nm: 0.6 m typical | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical 1310 nm: 0.6 m typical 1550 nm: 0.6 m typical |
| Attenuation dead zone 2 | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical | 1310 nm: 3.6 m typical 1550 nm: 3.7 m typical | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical 1310 nm: 3.6 m typical 1550 nm: 3.7 m typical |
| Dynamic range 3, 5, 6 | 850 nm: 28 dB typical 1300 nm: 30 dB typical | 1310 nm: 32 dB typical 1550 nm: 30 dB typical | 850 nm: 28 dB typical 1300 nm: 30 dB typical 1310 nm: 32 dB typical 1550 nm: 30 dB typical |
| Max distance range setting | 40 km | 130 km | MM: 40 km SM: 130 km |
| Distance measurement range 4, 5, 7, 8, 9, 10 | 850 nm: 9 km 1300 nm: 35 km | 1310 nm: 80 km 1550 nm: 130 km | 850 nm: 9 km 1300 nm: 35 km 1310 nm: 80 km 1550 nm: 130 km |
| Reflectance range 4, 5 | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) | 1310 nm: -14 dB to -65 dB (typical) 1550 nm: -14 dB to -65 dB (typical) | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) 1310 nm: -14 dB to -65dB (typical) 1550 nm: -14 dB to -65 dB (typical) |
| Sample resolution | 3 cm to 400 cm | 3 cm to 400 cm | 3 cm to 400 cm |
| Pulse widths (nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns | 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns |
| Test time (per wavelength) | Auto setting: 5 sec (typical) | Auto setting: 10 sec (typical) | Auto setting: MM – 5 sec (typical) SM – 10 sec (typical) |
| Quick test setting: 2 sec (typical) | Quick test setting: 5 sec (typical) | Quick test setting: MM – 2 sec (typical) SM – 5 sec (typical) | |
| Best resolution setting: 2 to 180 sec | Best resolution setting: 5 to 180 sec | Best resolution setting: MM – 2 to 180 sec M SM – 5 to 180 sec | |
| FaultMap setting: 2 sec (typical), 180 sec (max) | FaultMap setting: 10 sec (typical), 180 sec (max) | FaultMap setting: MM - 2 sec (typical), MM - 180 sec (max) SM - 10 sec (typical), SM - 180 sec (max) | |
| DataCenter OTDR setting: 1 sec (typical at 850 nm), 7 sec (max) | DataCenter OTDR setting: 20 sec (typical), 40 sec (max) | DataCenter OTDR setting: MM – 1 sec (typical at 850 nm) MM – 7 sec (max) SM – 20 sec (typical) SM – 40 sec (max) | |
| Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec | Manual setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec | Manual setting: -3, 5, 10, 20, 40, 60, 90, 120, 180 sec SM - 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
- Measured at 1.5 dB below non-saturating reflection peak with the shortest pulse width. Reflection peak < -40 dB for multimode and < - 50 dB for singlemode.
- Measured at +/- 0.5 dB deviation from backscatter with the shortest pulse width. Reflection peak < -40 dB for multimode and < - 50 dB for singlemode.
- For typical backscatter coefficient for OM1 fiber: 850: -65 dB, 1300: -72 dB.
- Typical backscatter and attenuation coefficients for OM2-OM4 fiber: 850 nm: -68 dB; 2.3 dB/km: 1300 nm: -76 dB; 0.6 dB/km.
- Typical backscatter and attenuation coefficients for OS1-OS2 fiber: 1310nm : -79 dB; 0.32 dB/km; 1550 nm: -82 dB; 0.19 dB/km.
- SNR=1 method, 3 minute averaging, widest pulse width.
- 850 = 9 km typical to find the end or 7 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
- 1300 = 35 km typical to find the end or 30 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
- 1310 = 80 km typical to find the end or 60km typical to find a 0.1 dB event (with a maximum of 20 dB attenuation prior to the event).
- 1550 = 130 km typical to find the end or 90 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
- Does not include index of refraction error and does not include automatic event location error.
- dB variation per 1 dB step.
- Applies along the trace backscatter within the distance range in which the OTDR can find a 0.1 dB event.
Additional key specifications
| FiberInspector probe specification | |
| Magnification | ~ 200X with OptiFiber Pro Display |
| Light source | Blue LED |
| Power source | Versiv mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum detectable particle size | 0.5 µm |
| Dimensions | Approximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip |
| Weight | 200 g |
| Temperature range | Operating: 32°F to 122°F (0 °C to +50 °C) Storage: -4°F to +158°F (-20°C to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL specifications | |
| On/Off control | Mechanical switch and a button on the touch screen |
| Output power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating wavelength | 650 nm nominal |
| Spectral width (RMS) | ±3 nm |
| Output modes | Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector adapter | 2.5 mm universal |
| Laser safety (classification) | Class II CDRH Complies to EN 60825-2 |
| General specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in ( 6.67 cm x 13.33 cm x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Integrated Wi-Fi | Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz) |
| Charge Time | |
| Tester Off | Four hours to charge from 10% to 90% capacity |
| Tester On | Six hours to charge from 10% to 90% capacity with the tester on |
| Environmental specifications | |
| Operating temperature* | -10ºC to 45ºC |
| Storage Temperature | -10ºC to +60ºC |
| Operating altitude | 4,000 m (13123 ft) 3200 m (10,500 ft) with ac adapter |
| Storage altitude | 12,000 m |
| EMC | EN 61326-1 |
* Using battery power. With AC power: 0ºC to 45ºC. Real Time Trace function used for no more than 5 minutes in a 15-minute period. Maximum ambient temperature is 35ºC for continuous use of the Real Time Trace function.
* Do not keep battery at temperatures below -20°C (-4°F) or above 50°C (122°F) for periods longer than one week to maintain battery capacity.
Documents
Brochures
| Title/Description | Download | |
|---|---|---|
Versiv Installation Contractor Brochure
| Download PDF 1.92 MB |  |
Data Sheets
| Title/Description | Download | |
|---|---|---|
LinkWare Data Sheet
| Download PDF | |
OptiFiber Pro OTDR Datasheet
| Download PDF | |
Catalogs
| Title/Description | Download | |
|---|---|---|
Fluke Networks Solution Catalog
The Guide for selecting and ordering Fluke Network Solutions and Products | Download PDF 5.58 MB | |
OptiFiber Pro Series OTDRs - Catalog copy EN
| Download PDF 55 KB | |
Fluke Networks 4 Page Catalog
| Download PDF 1.08 MB | |
Application Notes
| Title/Description | Download | |
|---|---|---|
Copper Certification Testing Best Practices Pocket Guide
| Download PDF 7.2 MB | |
Fiber Testing Best Practices - Pocket Guide
| Download PDF 4.93 MB | |
Registering Your Versiv Certification Tester
| Download PDF | |
Statement of Memory Volatility for the Versiv Cabling Certification Product Family
This document describes how to completely clear the product's memory. | Download PDF 420.97 KB | |
White Papers
| Title/Description | Download | |
|---|---|---|
Choosing The Right OTDR White Paper
| Download PDF 1.69 MB | |
Encircled Flux - Solving the Puzzle of Repeatable Fiber Loss Testing
| Download PDF | |
Spend Less Time Making Better Fiber Measurements
| Download PDF | |
The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need for Encircled Flux
| Download PDF | |
White Paper: Fiber Contamination, Cleaning and Inspection. Introduction.
| Download PDF | |
Whitepaper: Cabling Certification State of Industry
| Download PDF 382.91 KB | |
Whitepaper: How To Find Profits In New Places
| Download PDF | |
Installing Data Networks Using LinkWare Live SaaS
| Download PDF | |
White Paper: In the Data Center - Where and What Am I Testing?
| Download PDF | |
White Paper: Troubleshooting Fiber
| Download PDF | |
White Paper: Why Calibrate Your Cable Certifier?
| Download PDF | |
Flyers
| Title/Description | Download | |
|---|---|---|
Optifiber Pro Gold Benefits/value Flyer - US Priced
| Download PDF 3.48 MB | |
Top 5 Reasons to Upgrade to Versiv
| Download PDF 1.45 MB | |
Versiv Gold Membership Benefits - Overview
Versiv Gold Membership Benefits - Overview | Download PDF 2.9 MB | |
DTX2Versiv Flyer
| Download PDF 164.38 KB | |
LinkWare Live Sample Report
| Download PDF 2.49 MB | |
LinkWare PC Sample Report
| Download PDF 1.32 MB | |
OM and OS poster
| Download PDF 131.49 KB | |
Versiv and DTX CableAnalyzer Gold Membership Benefits - Overview (EU)
| Download PDF 1013.21 KB | |
Case Studies
Integrity Networks Alaska Branch
The Ultimate Test in the Alaskan Bush Survival Tip: Take care where the bears roam
Company Background
Integrity Networks provides communications services and cable and fiber network infrastructure installation for companies and federal, state and local governments nationwide and around the Pacific Rim. Based in Renton, Washington, their projects range from military bases in Guam and Singapore, data center and VOIP installations in Washington and Virginia, to major healthcare and corporate oil, gas and mining projects across Alaska.
Integrity Networks entered the Alaskan market in 2007, and it has remained a steady presence in low-voltage contracting there ever since. With branch headquarters in Anchorage, Integrity Networks has an extensive staff of highly skilled Alaskan employees that work on jobs in the last great American frontier.
Twistnet Communications Ltd
EXTREME DANGER: High Voltage Environment
With Fluke Networks OptiFiber® Pro OTDR with SmartLoop™, Twistnet technicians safely completed bidirectional certification of new North Sea Wind Farm installation
Company Background
Established in 2000, with more than 30 years of experience, Twistnet Communications Ltd. specializes in the installation, testing and certification of fiber optic cabling, structured cabling systems and voice cabling systems.
Twistnet Communications Ltd serves companies in the United Kingdom and Europe with core services and it offers experts in fusion splicing, direct fiber termination, OTDR and power-meter testing and certification and repair with state of the art equipment such as the Fluke Networks' OptiFiber Pro OTDR with SmartLoop, part of the Versiv™ line, the industry’s leading Cabling Certification System
LAN NET Solutions Case Study
LAN NET Solutions LLC Wins OptiFiber Pro In LinkWare Live Rewards Program
Texas-based LAN NET Solutions is the winner of the Fluke Networks LinkWare Live Rewards Program. As the saying goes, everything’s big in Texas, and the OptiFiber Pro prize that big winner LAN NET Solutions won is One Big Prize.
CompuCom Case Study
Challenge:
Headquartered in Dallas, Texas, CompuCom enables its customers to focus on their respective core businesses, while CompuCom handles their technology. Offering managed IT services, integration and consulting, as well as teams specializing in data centers, networks, voice and end-user environments, CompuCom supports more than four million users in North America alone. One of CompuCom's customers, 
a U.S.-based Top 10 Global Retailer, required a higher standard for fiber optic cable inspection, including faster testing and more comprehensive reporting. In response, CompuCom’s team turned to Fluke Networks.
Results:
As part of its service to this retailer, the CompuCom team maintains three data centers plus one backup bunker, containing nearly 20,000 servers and more than 150,000 cables. The team chose to adopt the Fluke Networks Versiv cable certification platform with a combination of the FI-7000 FiberInspector™ Pro, OptiFiber® Pro OTDR, and CertiFiber® Pro cable loss testing modules to provide easy repairs and upgrades. Since adopting the FI-7000 when it was first launched, the team has dramatically raised the standards in testing and reporting, while also simplifying test result accessibility and management. The FI-7000 enables faster test results, which have saved thousands of dollars each year. Most important, CompuCom's client has been very pleased with the higher levels of speed, quality and reliability made possible with the FI-7000. So much so, that this client now holds other service providers to similar standards.
Extreme Packets Case Study
Challenge:
Extreme Packets completes cabling projects large and small, providing computer network installation services to universities, businesses, and commercial real estate construction. Since its beginning more than 15 years ago, the company has developed deep expertise in cabling, while keeping long-term client relationships. As it has grown and looked to maintain a competitive edge, Extreme Packets saw an opportunity to excel in two key areas: completing jobs more quickly and establishing a simpler way of managing cable test results for its customers
Results:
Upgrading to the Versiv™ DSX-5000 and LinkWare™ Live has dramatically reduced the time it takes to get to systems acceptance. Extreme Packets has reduced its individual cable certification times by 79%, and with LinkWare Live, the company can share test results with clients as soon as they have been uploaded, saving time and allowing clients to track testing progress. Using Versiv and LinkWare Live, Extreme Packets has significantly reduced overall project completion time by as much as 70%. In many cases, a project that would normally take 12 hours to complete with their old testers now takes as little as four hours to finish.
Training
You need to train and certify your existing employees to stay competitive in the installation and certification of high-speed structured cabling systems. Investing in the Fluke Networks Certified Cabling Test Technician™ (CCTT) training and certification program will not only improve installer skills, but also their effectiveness and productivity on the job in testing, certifying and troubleshooting copper and fiber cabling systems.
Click here for more information on the CCTT program.
OptiFiber® Pro OTDR “Getting Started” Training Videos
New to the OptiFiber® Pro OTDR?
Learn the basics of operation, including unboxing, set-up, testing and reporting with our free video training courses.
Click here to access.
Gold Product Support
Gold Support for your OptiFiber Pro OTDR allows you to make the most of your purchase while ensuring a higher return on your investment. 
You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.
What do you get with Gold Support for your OptiFiber Pro OTDR and fiber module(s)?
Annual Calibration and Factory Refresh - ISO 9001 standards compliance requires annual unit calibration. Keeping your Fiber modules calibrated is critical to ensure accuracy when testing fiber networks. Our calibration processes are ISO-9001 controlled and designed to certify that your OptiFiber Pro OTDR and fiber module(s) meet all published specifications. When you schedule calibration for your OptiFiber Pro OTDR and covered fiber module(s) we will set you up to receive a loaner* unit while your OptiFiber Pro OTDR and covered fiber module(s) are precisely calibrated to factory specifications (calibration certificate provide - calibration traceable with data available for extra charge), repaired as necessary with genuine OEM repair parts, upgraded with all of the latest software and firmware then cleaned and performance verified. In addition, all accessories that came with your OptiFiber Pro OTDR will be tested and replaced if faulty or defective. *Loaner unit for calibration is currently only available in the U.S., and must be scheduled.
Repairs and loaner equipment - If your OptiFiber Pro OTDR should fail, we'll deliver a loaner unit via next business day delivery to keep you up and running. We'll repair your OptiFiber Pro OTDR and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.
Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of yourOptiFiber Pro OTDR and understand the results you are seeing.
Accessory Replacement - Some accessories are essential to your OptiFiber Pro OTDR . The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.
Software upgrades - Your OptiFiber Pro OTDR will never be out of date. You'll receive all software upgrades free.
Member Only promotions - Your membership qualifies you for Members Only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.
Ensure that you are getting the most out of your OptiFiber Pro OTDR with Gold Support Services.
