The Metal LC Connector: say goodbye to broken latches on fiber test reference cords
While there are many different types of optical connectors depending on what type of components you’re using, LC connectors have become very common throughout the networking industry.
Plastic LC connectors
Using plastic for connections that are going to be plugged in and rarely touched again works perfectly. But, when those connections need to be repeatedly made and disconnected, for example with fiber test reference cords, the flexible latch on the housing often breaks because of the repeated flexing.
August 23, 2021
PoE Load Testing: Advanced Troubleshooting for Your PoE Systems
Since the original IEEE 802.3af Type 1 power over Ethernet (PoE) standard that delivered up to 15.4 Watts (W) was first introduced in 2003, the technology has evolved to include Type 2 (up to 30 W), Type 3 (up to 60 W), and Type 4 (up to 90 W). That means PoE voltage now supports everything from phones, Wi-Fi access points, and surveillance cameras, to laptops, digital displays, and even facility-wide LED lighting—all requiring various levels of PoE power.
July 27, 2021
Cross Connects and Interconnects in the Data Center
In the data center space, cross connects and interconnects via patch panels are commonly used between active equipment purely for management and flexibility, typically residing between switch tiers or between switches and servers. Some scenarios even call for using multiple cross connects or interconnects within the same channel, or a combination thereof.
July 14, 2021
June 22, 2021
How to clean your cable and fiber network tester
Cleanliness has long been a best practice in fiber optic installation, but it’s not just the fiber end faces you need to worry about. If you think about how often your cabling tools and testers are touched by you and others on the job site, it’s clear that they too need to be cleaned.
While a fiber end face and your Fluke Network tester are cleaned for two different reasons, the goal in both instances is to clean without causing any damage.
June 11, 2021
How to Test Patch Cords and Fiber Jumper Cables - The Weakest Links
Equipment cords are an integral part of any network—whether it’s a fiber jumper used to make connections between fiber patching areas and switches in the data center or a copper patch cord out in the LAN to connect end devices to the work area outlet.
June 10, 2021
VLAN Troubleshooting with LinkIQ
Everyone in the ICT industry has heard of a local area network (LAN) and likely understands that it’s a network made up of a myriad of devices—computers, servers, Wi-Fi access points, VoIP phones, surveillance cameras, etc.—all connected in one physical location.
May 26, 2021
Versiv Cabling Certification Software Update 6.6
The newest version now available to the Versiv software updates the cabling certification software on multiple products in the Fluke Networks line. Once installed, these updates add new features to your tools as well as expand the number of cable specifications supported for testing.
May 13, 2021
April 28, 2021
Introducing LinkIQ™️ – Fluke’s Newest Ethernet Cable, Network, and PoE Tester
Cabling is the number one cause of Ethernet problems in both commercial and industrial applications. With Fluke Networks’ newest Ethernet tester, LinkIQ™️ Cable + Network Tester, you can troubleshoot that cabling and the network it’s connected to. Save your company or clients hours of downtime, keeping the network up and running as efficiently as possible.
April 21, 2021