Telephone voltages detected - MicroScanner2 | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  MicroScanner2

Telephone voltages detected - MicroScanner2

Figure 1 below shows that telephone voltage is detected on pair 4, 5.

Length is not shown because the voltage interferes with length measurements.

Figure 1 Telephone Voltages Detected

The tester is not intended to be connected to active telephone inputs, systems, or equipment, including ISDN devices. Prolonged exposure to the voltages applied by these interfaces may damage the tester.

Author: Fluke Networks

Creation Date: 2014-02-25

Last Modified: 2014-02-25