Changing the Length Units between Feet and Meters - MicroScanner2 | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  MicroScanner2

Changing the Length Units between Feet and Meters - MicroScanner2

The Length Units for the MicroScanner2 can be changed between feet and meters.

Start this process with the tester in the Off position.
  • Hold down PORT and UP ARROW while turning on the tester.
  • Press MODE to switch between feet and meters.
  • Turn the tester off, and then turn it back on to return to testing mode.

Author: Fluke Networks

Creation Date: 2014-02-25

Last Modified: 2014-02-25