OptiFiber® - Fiber Testing Tool - Knowledge Base Article

Knowledge Base

KB Home > Fiber Testing > OptiFiber®

Articles: OptiFiber®
Adding a Grid to the OTDR Plot - OptiFiber
Angled Physical Contact Connectors (APC) - OptiFiber
Connecting the OTDR to Spooled Cable - OptiFiber
Creating a custom logo for my OptiFiber's home screen
Custom Test Limit Setup - OptiFiber
FaultMap™ - OptiFiber
Ghosts - Optifiber
IEC 14763-3 test limits and methodology - OptiFiber
Internal Memory will not display 0% - OptiFiber
Interpreting OTDR Events - OptiFiber
Launch Leads - OptiFiber
LC to LC duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
LC to SC duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
LC to ST duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
Long fiber links - OptiFiber
Looking for Upgrade... OptiFiber
Lower Case Characters - OptiFiber
Manual Cable Settings - OptiFiber
Measuring Optical Power - OptiFiber
Memory - OptiFiber
Mixing 62.5/125 µm with 50/125 µm multimode fiber - OptiFiber
N/A appears in the event table for 1300 nm - OptiFiber
Negative OTDR loss event - OptiFiber
No Fiber Attached or Fiber Too Short - OptiFiber
OptiFiber below 0 ºC
OptiFiber Event Analyzer Performance
OptiFiber Smart Remote Option
OTDR Port Connection Quality - OptiFiber
OTDR Port Connector replacement
Overlay for OTDR traces - OptiFiber
Photo - OptiFiber
Reflectance and Optical Return Loss (ORL) Measurement and Testing - OptiFiber
Release notes - OptiFiber
Reset to factory defaults - OptiFiber
Sampling of OptiFiber
SC to SC duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
SC to SC singlemode patch cord testing (Optical Loss) - OptiFiber
SC to ST duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
SC/APC to SC/APC duplex fiber loss testing with OptiFiber and DTX-SFM/SFM2 adapters
Screen Resolution for OptiFiber
Set Launch Fiber Compensation - OptiFiber
ST to ST duplex fiber loss testing with OptiFiber and DTX-xFM2 adapters
Statement of volatility for OptiFiber
Transferring setup information between OptiFiber testers
Transferring test results from Internal Memory to MMC Card - OptiFiber
Updating the OptiFiber to V 2.6.4 via the USB or Serial Port
WARNING: Cannot measure backscatter (OptiFiber)
What is the resolution of the OptiFiber?