Progress Screen for Extended Test Times - DTX Compact OTDR Module

When the test time per wavelength exceeds 21 seconds, the tester shows the developing trace along with the progress indicator.

Figure 1 below shows an example of this screen. The tester updates the trace as measurement averaging proceeds.

To end a Manual OTDR test and see the results after the next trace update, press F2 Stop Averaging. For dual-wavelength tests, press F2 twice – once for each wavelength.

Note
This softkey is not available for Auto OTDR tests.

 Extended Test Times Progress Indicator

Figure 1. Progress Screen for Extended Test Times


Learn About:
- OTDR