Volatility statement for the Versiv/TFS platform

                                                                                                                                                                                              Date:  June 17, 2013

Statement of Memory Volatility

Models:

DSX-5000, CertiFiber Pro, OptiFiber Pro, OneTouch AT

Manufacturer:  Fluke Networks

Address:  6920 Seaway Blvd.

City:  Everett

State:  WA

Zip:  98203

Phone:  800-283-5853

 

Volatile Memory

Does the item contain volatile memory (i.e., memory whose contents are lost when power is removed)?

  Yes

Sub-Item:

Memory Type (SRAM, DRAM, etc.):

Size:

User Modifiable:

 

Function:

Process to Clear:

TFS / Versiv Main

Mobile DDR

256 MB

  Yes

  No

Program execution and data storage

Remove power (including battery) for at least 60 seconds.

TFS / Versiv Main

i.MX35 processor internal Cache

160 kB

  Yes

  No

Operating system, program execution and data storage

Remove power (including battery) for at least 60 seconds.

TFS / Versiv Main

PIC16F883 internal SRAM

256 B

  Yes

  No

Power supply management data storage

Remove power (including battery) for at least 60 seconds.

Versiv Remote

Mobile DDR

128 MB

  Yes

  No

Program execution and data storage

Remove power (including battery) for at least 60 seconds.

Versiv Remote

i.MX35 processor internal Cache

160 kB

  Yes

  No

Operating system, program execution and data storage

Remove power (including battery) for at least 60 seconds.

Versiv Remote

PIC16F883 internal SRAM

256 B

  Yes

  No

Power supply management data storage

Remove power (including battery) for at least 60 seconds.

DSX-5000 CableAnalyzer Module

DSP internal SRAM

132 kB

  Yes

  No

Program instruction and data storage

Remove power (including battery) for at least 60 seconds.

DSX-5000 CableAnalyzer Module

SRAM

2 MB

  Yes

  No

Program instruction and data storage

Remove power (including battery) for at least 60 seconds.

OptiFiber Pro OTDR Module

STM32F103ZCH processor internal SRAM

48 kB

  Yes

  No

Program data storage

Remove power (including battery) for at least 60 seconds.

OptiFiber Pro OTDR Module

FPGA SRAM

256 kB

  Yes

  No

Measurement data sample storage

Remove power (including battery) for at least 60 seconds.

CertiFiber Pro Loss/Length Module

STM32F103ZCH processor internal SRAM

48 kB

  Yes

  No

Program data storage

Remove power (including battery) for at least 60 seconds.

CertiFiber Pro Loss/Length Module

FPGA SRAM

4608 B

  Yes

  No

Communication packet data storage

Remove power (including battery) for at least 60 seconds.

OneTouch AT Module

SDRAM

512 MB

  Yes

  No

Program execution and data storage

Remove power (including battery) for at least 60 seconds.

OneTouch AT Module

K10 processor internal SRAM

64 kB

  Yes

  No

Measurement data

Remove power (including battery) for at least 60 seconds.

 

Non-Volatile Memory

Does the item contain non-volatile memory (i.e., memory whose contents are retained when power is removed)?

  Yes

Sub-Item:

Memory Type (BBRAM, Flash, EEPROM, etc.):

Size:

User Modifiable:

 

Function:

Process to Clear:

TFS / Versiv Main

NOR Flash

128 MB

  Yes

  No

Operating system, program storage, system logs, etc.

NA

TFS / Versiv Main

EEPROM

32 kB

  Yes

  No

Boot configurations, MAC address, electronic ID (serial number, module type, production date, etc), system configuration, etc.

NA

TFS / Versiv Main

PIC16F883 internal Flash

4 k words

  Yes

  No

Power supply management program storage

NA

TFS / Versiv Main

PIC16F883 internal EEPROM

256 B

  Yes

  No

Not used

NA

Versiv Remote

NOR Flash

128 MB

  Yes

  No

Operating system, program storage, system logs, etc.

NA

Versiv Remote

EEPROM

32 kB

  Yes

  No

Boot configurations, MAC address, electronic ID (serial number, module type, production date, etc), system configuration, etc

NA

Versiv Remote

PIC16F883 internal Flash

4 k words

  Yes

  No

Power supply management program storage

NA

Versiv Remote

PIC16F883 internal EEPROM

256 B

  Yes

  No

Not used

NA

DSX-5000 CableAnalyzer Module

NOR Flash

4 MB

  Yes

  No

Boot code, electronic ID (serial number, module type, production date, etc), and calibration data

NA

DSX Link Adapters

Flash

512 kB

  Yes

  No

Electronic ID (serial number, link adapter type, production date, etc), usage counts and calibration data

NA

OptiFiber Pro Module

STM32F103ZCH processor internal Flash

128 kB

  Yes

  No

Operating system, program execution, and electronic ID (serial number, module type, production date, etc)

NA

OptiFiber Pro Module

NOR Flash

2 MB

  Yes

  No

FPGA configuration image

NA

OptiFiber Pro Module

EEPROM

4 kB

  Yes

  No

Calibration data

NA

CertiFiber Pro Loss/Length Module

STM32F103ZCH processor internal Flash

128 kB

  Yes

  No

Operating system, program execution, and electronic ID (serial number, module type, production date, etc)

NA

CertiFiber Pro Loss/Length Module

FPGA internal Flash

128 B

  Yes

  No

Not used

NA

CertiFiber Pro Loss/Length Module

EEPROM

4 kB

  Yes

  No

Calibration data

NA

OneTouch AT Module

NAND Flash

1 GB

  Yes

  No

Module program and data storage

Restore OneTouch AT to Factory Defaults (see procedure in Appendix B).

OneTouch AT Module

EEPROM

4 kB

  Yes

  No

Module settings, serial number, MAC address, etc

NA

OneTouch AT Module

K10 processor internal Flash

512 kB

  Yes

  No

Cable test program storage

NA

 

Media

Does the item contain media storage capability (i.e., removable or non-removable disk drives, memory cards, etc.)?

  Yes

Sub-Item:

Storage Type (Disk, Tape, etc.):

Size:

User Modifiable:

 

Function:

Process to Clear:

TFS / Versiv Main

Internal microSD Flash card

2GB

  Yes

  No

System settings, project settings, test result storage, user names, passwd, snmp strings, etc

Restore TFS / Versiv Main to Factory Defaults (see procedure in Appendix A).

Restore OneTouch AT to Factory Defaults (see procedure in Appendix B).

TFS / Versiv Main

Removable USB devices

Variable

  Yes

  No

Flash storage drive or  keyboard / mouse connectivity

Cover port with evidence tape to ensure media devices are not used. If media is present, destroy storage media or perform multiple overwrites.

OneTouch AT Module

Internal microSD Flash card

2 GB

  Yes

  No

Reports, profiles, screen shots, certificates, etc.

Restore OneTouch AT to Factory Defaults (see procedure in Appendix B).

OneTouch AT Module

Removable SD Flash card

Variable

  Yes

  No

Capture storage and data transfer

Cover port with evidence tape to ensure media devices are not used. If media is present, destroy storage media or perform multiple overwrites.

 

Additional Information:

All of the DSX-5000, CertiFiber Pro (CFP), OptiFiber Pro (OFP), and OneTouch AT products can be configured into kits that can include some or all of the sub-items listed below:

  • TFS / Versiv Main
  • Versiv Remote
  • DSX-5000 CableAnalyzer Module
  • DSX Link Adapters (various)
  • CertiFiber Pro Loss/Length Module (various)
  • OptiFiber Pro OTDR Module (various)
  • OneTouch AT Module

 

Appendix A: TFS / Versiv Main Restore to Factory Defaults

If a OneTouch AT module is connected to the TFS / Versiv Main unit, remove that module from the main unit.  Power up the TFS / Versiv Main while holding down the HOME key. Tap Tools followed by Memory Status and follow the instructions shown below.

1.    Touch the parts of the screen in the order shown below.

 

http://myaccount.flukenetworks.com/NR/rdonlyres/1DE94EA3-5DC1-4890-B76B-846D1E980025/0/MemoryStatus.jpg

 

2.    You will then see a Restore Defaults button appear.

 

http://myaccount.flukenetworks.com/NR/rdonlyres/2A0B2181-BEE7-4376-939B-382DE1C436FB/0/RestoreDefaults01.jpg

3.    Tap this for a final warning about doing this.

 

 

http://myaccount.flukenetworks.com/NR/rdonlyres/575288B1-251F-4F7A-A7E4-FA5EAF723EF4/0/RestoreDefaults02.jpg

 

The TFS / Versiv Main unit will then delete stored user data and restore the system to factory defaults before playing a tune and rebooting the system.

 

 

Appendix B: OneTouch AT Restore to Factory Defaults

Requires OneTouch AT version 2.0 software or later.  With the OneTouch AT module connected to the TFS / Versiv Main unit, connect the AC adapter and power up the system then follow the procedure shown below.

 

1.    On the HOME screen tap the TOOLS icon

 

lantis_home.png

 

2.    Scroll down to the Maintenance Tools section.

 

lantis_mts.png

3.    Tap Factory Defaults.

 

 

lantis_fd.png

4.    Tap the Full button.

 

 

lantis_fd_full.png

 

The procedure may take as long as 30 minutes to complete.  Do not interrupt the process while it is in progress.