DATASHEET
SimpliFiber Pro Multimode and Singlemode Sources
Download PDF
Overview
Sturdily built and encased in a durable molding, the next generation SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple.
SimpliFiber Pro Multimode and Singlemode Sources
When combined with a SimpliFiber Prooptical power meter, these sources enable you to:
- Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 850 and 1300 nm or 1310 and 1550 nm wavelengths can be transmitted simultaneously
- Conveniently save measurements taken at both wavelengths into one record
- Eliminate time-consuming mistakes with the automatic wavelength detection ability
- Quickly identify patch panel cable routing without the assistance of a talk set and another technician
*The multimode source is standard in the FTK1000, FTK1300, FTK1375, and FTK1475 kits; the singlemode source is standard in the FTK2000 and FTK1475 kits or available separately as a standalone module.
Specifications
| Multimode Optical Source | |
|---|---|
| Emitter Type | LED |
| Central Wavelength | 850 nm, 1300 nm |
| Wavelength Accuracy |
850 nm: +/-30 nm 1300 nm: +/- 20 nm |
| Spectral Width (FWHM) |
850 nm: 50 nm (typical) 1300 nm: 135 nm (typical) |
| Minimum Output Power | 850/1300 nm: ≥ -20 dBm |
| Power Output Stability1 | ±0.1 dB over 8 hours |
| Auto Dual-Wavelength Switching | Yes. Can be enabled/disabled by user. |
| Optical Output Connector | Fixed SC2 |
| FindFiber Code Generation | Yes. Fixed at ID 1. |
| Modes | CW, 2 kHz modulated, Auto-wavelength |
| Power Requirement | 2 AA Alkaline batteries. |
| Battery Life3 | 40 hrs (typical) |
| Automatic Power Off | 30 minutes (can be disabled by user) |
| Low Battery Warning | Yes, LED blinks |
| Size (L x W x H) |
5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm) |
| Weight | 9.8 oz (278 g) |
| Singlemode Optical Source | |
|---|---|
| Emitter Type | FP Laser: dual 1310 nm/1550 nm |
| Central Wavelength |
1310 nm: +/- 20 nm 1550 nm: +/- 30 nm |
| Spectral Bandwidth (RMS) |
1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum) |
| Minimum Output Power | 1310/1550 nm: ≥ -7 dBm (typical) |
| Power Output Stability1 | ±0.25 dB over 8 hours |
| Auto Dual-Wavelength Switching | Yes. Can be enabled or disabled by user. |
| Optical Connector | Fixed SC2 |
| Launch Condition | 9/125 μm fiber |
| FindFiber Code Generation | Yes. Fixed at ID 2. |
| Modes | CW, 2 kHz modulated, Auto-wavelength |
| Power Requirement | 2 AA Alkaline batteries. |
| Battery Life3 | 30 hrs (typical) |
| Automatic Power Off | 30 minutes (can be enabled or disabled by user) |
| Low Battery Warning | LED blinks. |
| Size (L x W x H) |
5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm) |
| Weight | 9.8 oz (278 grams) |
|
1 23° C ± 2° C, after 5 minutes warm-up time 2 LC and ST connectors can be tested using hybrid test-reference cord accessories. 3 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries. |
|
