Home > Support > Knowledge Base

Auto power off for the SimplFiber Pro source

There are two auto power off settings for the SimplFiber Pro source:

  • Enabled, the source turns off after 30 minutes if no keys are pressed. (Default factory setting)
  • Disabled, the source remains on until the battery dies. (40 Hrs for Multimode and 30 Hrs for Singlemode)
To enable or disable auto power off, hold down the Mode key for four seconds

  • If auto power-off is enabled, all LEDs turn on for 3 seconds.
  • If auto power-off is disabled, all LEDs blink for 3 seconds and the LOW BATTERY LED blinks occasionally.