Home > Support > Knowledge Base

Daisy Chaining ETAM's

When daisy chaining ETAMs, if the second ETAM does not show: 
  1. Check the setting on the 10 Position Thumbwheel switch making sure they are not the same. Also, if you are using ETAM with the NetTest Expansion unit, make sure that the ETAM position is NOT 0 (zero). 
  2. When daisy chaining the ETAM, there is an ETAM cord that connects the first ETAM to the second ETAM. Verify that this ETAM cord on the first ETAM is attached to J2 port and that this cord connects to the J1 port on the second ETAM. 
  3. Check to be sure the power indicator light is green.