Cabling Chronicles
Another Year of Thanks!
It’s that time of year again to give thanks! We are thankful for market growth continuing to be fueled by the IoT and Big Data, and for all the noteworthy standards ratifications that happened this year. We also wanted to take a minute to let all of our Cabling Chronicles blog fans know just how thankful we are that you continue to read our blog. We are committed to providing you with expert, valuable information to keep you informed about what's new in the world of cabling, testing and standards.
November 20, 2018
Get to know Lengthonomics
This is a guest blog from Carrie Goetz (D.MCO, RCDD/NTS, CDCP, CDCS, 1st Degree IM) who is the Global Technology Director Paige DataCom Solutions.
November 13, 2018
Get to know Lengthonomics
This is a guest blog from Carrie Goetz (D.MCO, RCDD/NTS, CDCP, CDCS, 1st Degree IM) who is the Global Technology Director Paige DataCom Solutions.
November 13, 2018
Version 6.0 Features Benefit New and Current OptiFiber Pro Users
You’ve probably heard of the new OptiFiber Pro HDR models we recently introduced, which are designed for OSP and PON applications. However, there are a number of new features now available as part of this launch that work in both the current OptiFiber Pro as well as the new HDR models. In fact, these new features can be added to any existing OptiFiber Pro at no charge through a simple upgrade. Let’s check out these new capabilities.
November 6, 2018
New OptiFiber Pro High Dynamic Range Modules for Outside Plant and Passive Optical Networks
With the new Fluke Networks OptiFiber® Pro High Dynamic Range (HDR) Optical Time Domain Reflectometer, Versiv becomes a single solution for applications ranging from FTTx, PON and datacenters to category-rated structured cabling. Since Versiv users report that its efficient and familiar interface cuts costs by 65% when testing, certifying and maintaining copper and fiber network installations, it’s clear why they’d want to apply the same savings to outside plant jobs as well.
October 31, 2018
It’s That Time of Year Again – Beware of Ghosts and Dead Zones!
There’s a chill in the air, leaves are falling and it’s time for all things spooky. So we thought that in the spirit of Halloween, we would post this blog again that takes a look at two of the most confusing (and perhaps scariest) OTDR events--ghosts and dead zones.
October 24, 2018
What’s Up with Industrial Ethernet?
Due to its inherent reliability, performance and interoperability, Ethernet has infiltrated the factory floor as the communication protocol of choice for automation and control systems. This year, Industrial Ethernet has overtaken market share from traditional fieldbus protocols that typically require multiple segregated and proprietary cabling plants.
October 18, 2018
101 Series: What is an APC Connector and How Do I Test It?
The singlemode fiber connectors you likely encounter the most feature a blue connector body, but if you’re working with any passive optical networks (PONs), carrier networks or large cloud/colo or hyperscale data centers, you may encounter singlemode fiber connectors with a green connector body – and these green connectors are growing in popularity.
October 11, 2018
Type 3 and Type 4 are Here!
Last week the IEEE 802.3bt standard for Type 3 and Type 4 PoE was finally ratified! While we’ve been talking about these higher levels of PoE for quite some time, now that they are finally an approved standard, we thought it was a good time to clear the air on PoE types, classes, and certification, as well as provide a refresher on our specialty—testing.
October 4, 2018
Mixed Mindfulness
When it comes to a cabling infrastructure, not all media and applications are always the same. So for each and every link, it’s important to be aware of what you’re testing—from both a media type and application standpoint.
September 26, 2018