Customers Stories

Select a product to see all customer stories

CableIQ Qualification Tester OptiFiber® Pro OTDR
D-Snips™ Pocket Toner®
DSP CableAnalyzer™ Series Pro3000™ Analog Tone and Probe
DTX CableAnalyzer™ Series TS® 100 Cable Fault Finder
Fiber OneShot™ PRO TS® 40 Series Test Sets
Fiber QuickMap™ TS® 52 PRO Test Sets
IntelliTone™ Pro Toner and Probe TS® 53 PRO Test Sets
LinkWare™ Cable Test Management Software TS® 54 TDR Test Set
MicroMapper™ TS® 90 Cable Fault Finder
MicroScanner² Cable Verifier VisiFault™ Visual Fault Locator - Cable Continuity Tester
MultiFiber™ Pro Optical Power Meter and Fiber Test Kits
OMNIScanner Series
OptiFiber® OTDR Optic Cable Tester
 

 

CableIQ Qualification Tester

"In the Broadcast Centre at BCIT our video editors edit their Projects directly off our SAN. It's necessary that we ensure a GiGe connection between our clients and our Servers. Since we install and maintain our own systems the Fluke Networks CableI/Q Qualification Tester has been a very important part of our tool-kit as Broadcast Engineers. It has, on a number of occasions helped us locate, identify and resolve network problems relating to our cabling & connectors. We've also used it to qualify pre-made cables and to qualify completed systems. It provides a level of security and system integrity that gives us peace of mind. If there's a problem related to network speed and bandwidth, we can quickly verify our cabling & connectors and eliminate them as a potential source of any problems. Without it we'd be flying by the seat of our pants not really being able to have confidence in our system connectivity. " - Ron Kellington, Chief Engineer at British Columbia Institute of Technology


 

"I was called in for a service call to discover the issues with an existing data cable that was not operating properly. Another company had installed the cabling. I verified the cable was patched into a gigabit switch, used the blink port option and found the cable to be mislabelled using the Cable IQ. I then tested the cat 6 cable to verify gigabit connectity and found the jack to be miswired. I reterminated the cable and had the computer outlet working with in 5 minutes. Quick and simple." - Tyler Friesen, Owner/Technician at Friesen DataCom


 

"Not only do we use the Cable IQ for qualifaction and documentation, but it has saved plenty of time in troubleshooting networks. In one case it took about 5 minutes to find and locate missing patch panel connection that wasn't labeled, this might have taken 30 minutes to an hours otherwise. In another case, it detected a crossed punched down pair, and even told me what pair was punched down incorretly, again reducing troubleshooting and fixing time to a fraction of tracing the issue down any other way. When the Cable IQ reports the connections/wiring are good, we know we can count on it!" - Tim Leed, Leed Custom Design


 

"Wireless Bridges: We use the Cable IQ Tester to verify the wiring from the power injector all the way up a 150' tower to the wireless bridge. The bridge may not be a standard switch or device termination, but comparing a good bridge (with a known good cable, confirmed with Cable IQ!), we can check the state of the bridge and wiring without climbing a tower. The bridges typically use PoE injectors on the unused pairs of Cat5 and the Cable IQ lets us check all 4 power wires for continuity. If one of the 4 wires is open, the bridge will start to act erratically when the heater (and current draw) kicks in. This has saved us time, many climbs and now have confidence that the installation is OK, it must be the configuration! " - Scott Curell, City of Winnipeg


 

"I was called to troubleshoot the network connection between a POS and a switch located under the cash wrap about 30 ft apart. I was told by their NOC that the switch has been replaced recently and the POS keeps dropping off the network. I put the remote from the Cable IQ-100 on one end and the Tester on the other end and it showed the wire map of the CAT5 cable were correct. I put the IQ-100 in autotest and discovered the CAT5 run only qualyfies for 10 MBit speed, I then put the IQ-100 in DIAG mode and ran crosstalk test resulting in induced crosstalk between pair 12 and 56 and between 12 and 34. I took out the wall plate with the CAT5 jack, it looked like a really old one from back in the days, I replaced it with a CAT5e keystone and ran the autotest again with my IQ-100 and voila the drop is now qualified for 10,100,1000 and VoIP. I luve my Fluke Networks Cable IQ-100. " - Erwin Niehaus, VP at IT Support


 

"Before we purchased the CableIQ tester the challenges as a network administrator we great. Tracing wires was virtually impossible. Now I have time to complete entries for free t-shirts. Actually I don't but I do now have more time to pursue other projects. It is a good product that makes networking a whole lot easier. " - Dave Filanowski, ABC Group Inc.


 

"I work in the machine building industry on large heat treating furnace lines. I use the Fluke Networks CableIQ Qualification Tester to check and verify all ethernet connections before the equipment is passed on to the customer. This tool has been invaluable in finding faults." - Stuart Balan, SBE.


 

"We use our CableIQ Qualification tester almost daily. Our main use is for cable qualification but it also comes in handy for troubleshooting. We have used it multiple times to find breaks in cables and other network problems. It has also helped with Interference issues. " - Jeff Peck, Network Specialist at Intralinks, Inc.


 

"I had sporadic and unusual customer calls that would crop up every few months on a particular link. After reviewing my case logs for several months I started to notice that this link seemed to have issues more often than other links. There were reports of packet loss and other transient symptoms. In a moment of down-time I was able to bring my Fluke Tester down to the link in question and it passed the first two times I ran the test, but it failed on the third. Problem isolated, cable replaced. Thanks Fluke Networks! " - Eric Pulvino, Cisco Systems.


 

"This is the most versatile tester we have in use. Due to a high churn rate within the agency we often are left with unlabelled outlets after rebuilds. On one particular occassion we had both old and new oulets in the same office not labelled. By using the tone sender we identifed the older set of outlets location within the FD rack and also identified the newest set of outlets had not been terminated to the CP." - Rob Tutt, DEEWR.


 

"We use the Fluke product to test all cables when running new ethernet lines and also for troubleshooting on existing network runs." - John Stairs, Network Technician at Remington Arms Company.


 

"We have a large fleet of mobile recover vehicles that have a CAT5/ VoIP infrastructure. This tester has saved the day multiple times by being able certify that the cabling isn't the problem and force the vendor to look at their equipment." - Chris Day, Rentsys Recovery.


 

"'ve been in the engineering and engineering education fields for most of my life, and Fluke Networks equipment has always been the benchmark of quality for all but the most exotic equipment. I have bought lesser equipment when my needs or my budget were limited. None of my Fluke Networks equipment has ever failed me. This purchase was at the lowest price on the web. The shipping was immediate (two days from order to delivery!), and the item was (and is) perfect! For certification of data over copper, the Fluke Netowrks CableIQ is the best in its price class." - Matt Howell, CEO/President/General Manager/Chairman at Howell Inc.


 

"We were able to quickly audit patch panels in our data center. This saved us alot of man hours and money to hire other people to perform the same job. " - Dan Nguyen, IT Management: Systems Integrator at Ellie Mae.


 

"Our primary line of business is supporting servers and the infrastructure connecting these to the PC's for small businesses, 1-100 PC's. More than one half of our client base is a result of using Fluke Networks tools to locate performance and connectivity issues for new clients who's existing support service could not pinpoint. By gaining customer confidence in doing so, most often we retain the client as one more network to manage. In short Fluke Networks tools are effectively responsible for more than half of our long term revenue. " - Rob Williams, Owner at LAN-Tech Network Management.


 

"I'm the main network administrator at a college in northern BC, Canada. We have used numerous Fluke Networks products over the years to help troubleshoot and design our wired networks both at the main campus and our 5 regional campuses. We have in our stock Intellitone probes, CableIQ testers and even an Etherscope. None of the guys leave to do a wiring or install job without at least one of these Fluke Networks products in their tool kit. A few of the new guys have learned the hard way that if they don't take the Fluke Networks products with them the job will be a lot harder and longer. Thanks." - Steven Dickson, Network Administrator at College of New Caledonia.


 

"When XZact Technologies started 7 years ago, our testers were re-furbished Agilent Wirescopes because they were cheap. We lost countless hours testing and sending them in for repair. We could not be competitive with our bids if we were to put the actual testing time it took with those pieces of junk! Those testers were a hinderance, not a tool. Many times we just gave up and used Mod Tap's. As our business grew, we were able to buy a couple of DTX-1800's and what a difference. Our technicians flat out refused to use the Agilent and would fight over using the Flukes! We now have eight of them and several Cable IQ's. We will be ordering an OFP-100-QI in the next few weeks. We are now a 100% Fluke Networks shop!" - Sally Garver, Sr. Project Coordinator at XZact Technologies


 

"These great tools from Fluke Networks helps me do my job extremely efficient and through. I work at the southernmost point in the Continental United States, with this location comes coral dust and salt air. When it comes to layer zero it's a must to have this kind of equipment. In the past three years we have run 3.4 miles of fiber, 37.8 miles of cat6, and 11 miles of rg6 between all three of our properties. Our property which spans from the Atlantic to about a half a mile inland has the most acidic environment I've ever dealt with. I just can't see being able to do my job at all without these devices, thanks again for your technology Fluke Networks!" - Duane Webster, CIO/CTO/VP of IT at Southernmost Hotel Collection

TOP

 



 

D-Snips™

"Without my D-Snips, my poor arthritic hands couldn't cut the mustard, let alone Cat-5 cabling. I use Fluke Networks tools all day, every day, from the snips to punch down tool to need-l-lock pliers to my butt set!" - Tom Thiel, Acme Telephone Works

TOP

 



 

DSP CableAnalyzer™ Series

"Our primary line of business is supporting servers and the infrastructure connecting these to the PC's for small businesses, 1-100 PC's. More than one half of our client base is a result of using Fluke Networks tools to locate performance and connectivity issues for new clients who's existing support service could not pinpoint. By gaining customer confidence in doing so, most often we retain the client as one more network to manage. In short Fluke Networks tools are effectively responsible for more than half of our long term revenue." - Rob Williams, Owner at LAN-Tech Network Management.


 

"I have worked in two locations, within the same company, and have spent about 23 years working in the I.T. field. The first real piece of test equipment I purchased was the DSP-100. I've gone through two batteries and one charger but I can still count on it to tell me if I am on the edge of the Ethernet range or if I can still get my cables terminated correctly. I think that it works as hard as I do, well, maybe even harder. :-) " - John Gutfreund, Methanex Corporation.


 

"I'm a computer network engineer by profession and a communications technician by trade. These two skill sets go hand in hand. Communications systems from the cable up are my responsibility and when I use my DSP I trust it to tell me what's going on. I can quickly find out if my problem is in the cable and if it is, it will tell me exactly what it is and where. With my fibre adapters I can check not only copper, but fire links for faults. It almost feels like i'm cheating!" - Ben Stook, IT Manager/Director at Modular IT.


 

1.) Enter problem here.
2.) Break out any one of our wonderful Fluke Networks products.
3.) Problem fixed.
"Seriously, our Fluke Networks products are like gold around here. Everybody uses the Fluke Networks products to quickly gain info about the network. Fluke Networks makes us awesome. THX!"
- Chris Burns, Network Eng. Team Leader at DST Systems, Inc.

TOP

 



 

DTX CableAnalyzer™ Series

1.) Enter problem here.
2.) Break out any one of our wonderful Fluke Networks products.
3.) Problem fixed.
"Seriously, our Fluke Networks products are like gold around here. Everybody uses the Fluke Networks products to quickly gain info about the network. Fluke Networks makes us awesome. THX!"
- Chris Burns, Network Eng. Team Leader at DST Systems, Inc.


 

"The saying you get what you pay for! It is always true with Fluke Networks products, I have tried buying a cheap cable analyse in the past and just get frustrated and annoyed with the outcome, I have tried software on laptops for investigating wireless problems to no avail, so I invested in the LRAT 1000 and the AirCheck kit, and after spending a week trying to resolve a wi-fi problem, I found the fault in less than 5 mins using the AirCheck, the new LRAT 1000 helped me find a cable that had been chewed through on a duct and gave me the measurement to the fault with 10cm of its position. And the DTX-1800 tests all my Cat5e, Cat6 and Fibre installs without any problems, I don't entertain any other make of test equipment and have learned to buy the quality product first time. Keep up the good work fFuke Networks!" - Mark Nicholson, CEO/President/General Manager/Chairman at MJN Technical Services Ltd.


 

"I'm the infrastructure cabling engineer for campus. With all the projects we have, it it nice to get test reports downloaded to me in the native format (.FLW). I then use Linkware to review and approve cabling tests. Beats the days of a ream of paper for printed test reports or even scrolling through a large PDF file." - Glen Hickman, IT Project Manager at Georgia Institute of Technology.


 

"How does Fluke Networks play a role in my work environment? Working as a Network Cabling Technician, I'm constantly using a Fluke Network Data Cable Tester to tone out my work. I couldn't imagine trying to accomplish my job without the reliability of a Fluke Network Tester. By utilizing this tester my team and I have been able to avoid network down time by testing for wrongly terminated Ethernet pairs. So I consider my Fluke Networks Tester an essential tool in my cabling bag." - James Bowles, State of West Virginia Office of Technology.


 

"With my Fluke Networks DTX 1800 I am able to test over 1,000 strands of fiber in 8 hours, with a job that has over 38,000 strands, that is important!" - Michael Pulliam, Miller Electric Company.


 

"With the Fluke DTX 1800 we can easily analyze saved test results in the built in linkware software which has a very user-friendly interface. With this Fluke Networks meter and the linkware software we can also create professional looking test results that can be sent via e-mail to the client. These files are in PDF format colorful one page test results created for each cable certified. This page includes the wire map diagram of each conductor within the cable. It also lists the Pass/Fail for the many parameter tests and all of the associated measurements for each test. The test result also includes the total length of each of the 4 pairs of the cable. This DTX Cable Analyzer from Fluke Networks is the tester for our needs present and future." - Elvis Santiago, Salient Federal Soultions.


 

"Clients network having numerous errors and losses, loosing network connections etc. Upon testing the installed cable a number of errors were present. Improper terminations, too much untwist, cables and kinked inside walls. Cables were re-terminated or replaced to correct the problem and re-tested. Network is now operating properly to CAT6 standards and no more complaints of network issues. This had been a problem for about 6 weeks prior to be called in to test the infrastructure. Within a very short period of time the customer was able to see where and what the problems were and then steps to correct the issues. Fluke Networks DTX 1800M does the job well and quickly." - Bob Dancy, Owner at Rodan Communications.


 

"As a intergrator quoting on projects, having the right tools like the DTX Cable Analyzer allows us to eliminate the "truck slammers" from bidding on projects by educating the clients on the need and value to a properly installed and certified network infustructure." - Glenn Amell, Design Electronics.


 

"I set up a lot of circuitry laboratories for physics classes and this cable analyzer lets me make sure everything is running correctly for the students. " - Gregory Bode, University of New Haven.


 

"Using our various Fluke Network analyzers enables us to keep uptime up and costs down. I don't know how we existed without them. The investment has paid off many times over in many ways. " - Taylor Dickerson, Director of IS at North Florida Regional Medical Center.


 

"I used the DTX Cable Analyzer to test the electronics for my teams FSAE car. This product is fantastic and very user friendly. I've tought many other team mates on the team how to use this device and have been successful every time. Thanks Fluke Networks. We are strong believers in your products." - Robert Goebel, SDSMT.


 

"I could not find the IP address of a laptop that would go on our network for weeks and i bought Fluke Networks' prodcut and within 1 day I found that the user had placed a machine on the network not knowing that it was against policy. Thank you Fluke Networks." - Sean McNamara, US Army.


 

"In the beginning our company was not meeting ISO standards when doing cable installation, but now with the help of the DTX CableAnalyzer, it complies with the TIA & ISO! This is absolutely wonderful! " - Kevin Lee, Microsemi Corporation.


 

"the DTX has made certification so much easier for me. I saved thousands of dollars in certification costs. The LinkWare software is also straightforward and easy to use. " - Shaney Li, Strawberry.


 

"We use the Fluke Networks DTX OTDR to analyze and certify all of our Cat 5 and Fiber cableing use in our network, fire alarm and security systems throughout our site. It has become an invaluable tool in troubleshooting as well." - Bradley Lynch, Micron Technology.


 

"Had nodes go up and down and could not figure it out. Hooked up the DTX-1800, found out the issue was half way through the run, where there was some movement. " - Ken Baldwi, Kenosha County.


 

"I have used Fluke Networks products my entire life. In my current position at the University I use the DTX 1800 almost everyday for testing Fiber, Cat6, Cat6a and Cat5e cabling solutions. It cuts down on the amount of return visits to different classrooms and helps diagnose issues. We'd be lost without our Fluke Networks Testing equipment" - Brian Coleman, University of Pittsburgh.


 

"The DTX-1800 has allowed us to validate contractors good works/words and eliminating bad ones for cabling jobs" - David Letendre, Network Technician at Universite de Montreal.


 

"Being in one of the larger telecom outfits in the country we are constantly under the gun to get our projects completed quickly and efficiently. The Fluke Networks DTX-1800 is an indisposable tool for getting one of the most important parts of any of our projects behind us, the testing. Obviously installing a quality product is the easiest way to insure that the testing goes easily, but having a state of the art tool at your disposal that will not only tell you that there is a problem but will help you find where the problem lies goes a long way in bringing home the desired results, that is the ones that say PASS." - Jacques Levesque, Superintendent at M. C. Dean Inc.


 

"We use the DTX to 100% verify all copper and fiber installed. The flexibilty of setting up the testers allows us to move quickly when on large industrial site from Cat 6 ethernet to OS2 fiber for network backn=bones to OM1 PLC fiber. I know with confidence that if a customer calls with a network issue I can send then the test results from the link and help them to find the real network problem because I know if I have a passing test the cable and terminations is networking on." - Allan Logan, Intellicom.


 

"With the DTX-1800, we were able to obtain a $100K contract. We managed to certify over 3 k cables in 2012. Excellent product." - Aurele Meilleur, SMI2020 Inc.


 

"I use the dtx-1800 to ensure quality installations to customers and trouble shoot cabling in many different environments. My job would be significantly more difficult without this amazingly accurate tool. " - Derek Mellott, Network Technician at Fibertel.


 

"I live in Texas where Oil companies are huge and when they want something they always want it NOW. So one of the big oil companys needed to move in to a new building, 7 floors with over 6000 catagory 6A data cables. We installed, TESTED (with (3) DTX-1800's) and labled all of the 6000 plus cables in a 3 month period. A lot of long days and a couple of hurt feeling, but we got it done with the help of ya'lls testers.Now thats how I got my network on." - Douglas Rapp Jr., Cable Installation Contractor at Walker Engineering Inc.


 

"Had a server to switch communication issue, and when testing the cable with the DTX-1800 there were no apparent issues. Come to find out the line ran next to the power switch for the fan unit that was only coming on when the temperature reached a certain level. Turns out the server communication issues would only arrise while the fan was in operation. The power source from the fan was introducing interference causing the server communication to be intermittant. Once we rerouted the cable around the power source, the issue was resolved. " - Brian Rasband, Network Administrator at DISA.


 

"The DTX-1800 allow us to give the customer piece of mind knowing that the network cables installed will meet and or exceed TIA standards and that all their users computers will be back up and running the day after the move." - Andrew Reynolds, Project Manager at Cablek Industries.


 

"Since we bought the DTX-1800 it's been easy to resolve issues during testing, especially locating faults and opens where we would be suffering otherwise. Also switching quickly to test multi-mode fiber from copper channel tests without another tester has allowed us to deliver a site with only one tester!" - Phil Steward, EquipBureau Inc.


 

"I obtained the kit equipment to test the airplanes we build. We buy the DTX-1800 and then design and build rj-45 based adapters to connect to the airplane. " - William Swenberg, Sr. Electrical Engineer at Boeing.


 

"During several tours across the Middle East, Flukes Networks cable testers have assisted myself and my Marines in finding critical faults in both fiber and copper networks. Where seconds litterally mean lives, fFluke Networks has always been our choice in ensuring mission accomplishment." - John Weidenhammer, USMC.


 

"Whenever we submit our test results after completion of an installation, the customer always comments on how great the test results look using the Linkware software. It shows very detailed information in an easy to interpret manner." - Chris Williams, NetX Inc.


 

"The DTX-1800 has made networking cabling quicker and less stressful for our company. The DTX device enables us to quickly certifiy cables and provides easy to understand results to our customers. We are able to reduce job completion times because and the speed of testing. Also we know that the results we are getting are correct because it is a fFluke Networks device. " - Aaron Williams, IT Manager/Director at Resa4.


 

"Flukes DTX-CAble analyzers, helps us to troubleshoot issues that physically can go unseen. We had a cable that a company installed "go bad" so we used the analyzer to troubleshoot the cable and we found the exact spot where the cable was failing. This tool works great and has become a nessicary tool we use in our day to day work." - Dakota Cole, Filed Manager at Deeply Digital.


 

"It is so strait forward to test and document cables in the network. On the last job I was even able to have a full lunch break and get the results back to the office by the end of the day, so they could start the billing process. It was a great day and looking forward to many more. Thanks." - jason bowers, ConvergIT.


 

"Every day we meet new customers who are having problems with their network. The Fluke Networks DTX 1800 allows us to take a look at the complete link. It allows us to pin point problems. We use our DTX everyday on all of our new installs. This allows us to offer a 25 year warranty through hubbell, but most importantly it guarantees that the work we completed will perform with no issues. It has helped us build a great reputation in our marketplace." - Kris Yanke, Core tech structured cabling.


 

"I use this for testing and tracing cables. We do a lot or work involving Cable installations and management in CO and large network installations. It helps speed things up and easy of use. " - Gurmit Suri, Canadian Network Installations.


 

"Our IT department supports a sprawling network of fiber runs across campus. These are various vintages or installation; some high quality, some not. Many terminations and pathways are in less-than-ideal locations. We have our fair share of fiber breaks and problems. The DTX has been instrumental in enabling our team to be able to quickly and definitively identify the source of a link failure. " - Jason Lavoie, Manager of Networking at Bowdoin College.


 

"On a daily basis, I use my Fluke DTX to isolate and troubleshoot cables issues. Alternatively, I could spend many countless hours toning out cabling, instead, within just minutes, I know the health and suitability of the ethernet cables for which I support." - Joseph Sheldon, J&J Technical Services


 

"I've been using a Fluke Cable Analyzer for half a year now, and what I can tell you is that it really helps me when making custom-wired cables for our VoIP and networking equipment. My crossover cable failure rate went down by 100%!" - Zsolt Hegyi


 

"Two years ago our company decided to make Cat6A Cross Connect the Standard Ethernet cabling for all of our Data Centres. My job is Technical Prime in charge of Data Centres Engineering Standards and Installation Standards. As part of our Standards we must provide excellent Testing equipment to verify all installations of Data Equipment, the Fluke Networks DTX-1800 was exactly what we needed!! We began purchasing this Fluke Networks Tester with Cat6A modules, and have been more than satisfied with it's extensive Quality of testing for Belden Certified Installations which our customers demand today. We have been able to "Future Proof" our Data Centres for 10Gig Ethernet and Fibre Connectivity of all equipment. The Fluke Networks DTX1800 is now the Standard of Excellence for testing our Network. Thanks Fluke Networks!" - Chico Christie, Network Provisioning Manager at Bell Aliant


 

"As our electrical contracting industry moves more toward assisting customers to upgrade IT systems, our testers are invaluable to ensure the cables we install carry the signature of our company, which is a high quality both in installation and long term reliability." - Linda Tegeler, Northstar Electric Company


 

"When XZact Technologies started 7 years ago, our testers were re-furbished Agilent Wirescopes because they were cheap. We lost countless hours testing and sending them in for repair. We could not be competitive with our bids if we were to put the actual testing time it took with those pieces of junk! Those testers were a hinderance, not a tool. Many times we just gave up and used Mod Tap's. As our business grew, we were able to buy a couple of DTX-1800's and what a difference. Our technicians flat out refused to use the Agilent and would fight over using the Flukes! We now have eight of them and several Cable IQ's. We will be ordering an OFP-100-QI in the next few weeks. We are now a 100% Fluke Networks shop!" - Sally Garver, Sr. Project Coordinator at XZact Technologies


 

"These great tools from Fluke Networks helps me do my job extremely efficient and through. I work at the southernmost point in the Continental United States, with this location comes coral dust and salt air. When it comes to layer zero it's a must to have this kind of equipment. In the past three years we have run 3.4 miles of fiber, 37.8 miles of cat6, and 11 miles of rg6 between all three of our properties. Our property which spans from the Atlantic to about a half a mile inland has the most acidic environment I've ever dealt with. I just can't see being able to do my job at all without these devices, thanks again for your technology Fluke Networks!" - Duane Webster, CIO/CTO/VP of IT at Southernmost Hotel Collection


 

"I get my network on by making sure everything is in working order on the phyisacl side. And your products help keep us on the cutting edge of trouble shooting. I won't use anything else but fFluke Networks - I stand by your name." - Christopher Carlton, dst systems


 

"My Fluke Networks equipment is invaluable in my day to day environment where anything can and will go wrong, and must be addressed and corrected immediately. My Fluke Networks test equipment helps me pinpoint the and identify the cause of any and all network issues in no time at all!" - Richard Forbes, Network Engineer/Analyst/Consultant at NJ Transit


 

"Fluke OptiView provides me detailed insights what's happening within my networks to troubleshoot and performance optimizations, and it couldn't have been more efficient to use all features built-in tool instead of building the individual troubleshooting metrics and monitoring components by myself and putting the jigsaw puzzle together. With the integration of Wireless Analysis modules, OptiView was an All-In-One Swiss army knife for my network team. ROI and time savings with Fluke Optiview was much higher and it was a worth investment for the field missions that I've been to. And Fluke DTX was the only product that I would rely to certify for my cabling backbone infrastructures to eliminate layer1 issues, and just emphasis on the upper layers when it comes to network and performance troubleshooting. " - Aung Naing Oo, Network Engineer/Analyst/Consultant at United Nations.

TOP

 



 

Fiber OneShot™ PRO

"I use my Fluke Networks Fiber OneShot Pro fiber troubleshooter to locate faults in our network. It has never failed me and has proved to be very accurate. It has saved me hours of painstaking testing, but more importantly its use has resulted in better customer service through faster service restoration. Thank you for making a great product and keep up the good work!!" - Jody Hopper, MTS

TOP

 



 

Fiber QuickMap™

"I hired a contractor to trench fiber. Once it came time to terminate the ends, the contractor chose to polish manually instead of fusing. I used the Quickmap to show that the polishing was not done very well. The contractor then elected to fuse them, and I received a better product. I believe the Quickmap is well worth the money in time savings." - Mike Mincey

TOP

 



 

IntelliTone™ Pro Toner and Probe

"I have used the multiple times tracing networking cabling in industrial environments, Usually I am trying to fix a poorly done installation and trying to control costs for the customer (it would be easier and better long term to pull new cables and route them correctly). Being able to identify cables while in operation is invaluable in this situation. The Intelli tone saves us hours of diagnostic time."- Ray Corry, Advanced Technical


 

"With running tons of cable in large universities my company and I use the IntelliTone to trace our cables back to the IDF rooms. Then with all of our fiber we test with the Cable Analyzer and test CAT6,5e,etc with our Omniscanner (which has lasted us for what seems like forever). We also have a megohmmeter that we use occasionally to test the resistance in medium voltage cables. My company has always bought Fluke Networks products because they are reliable, accurate and the usage of the products are intuitive and easy to operate. " - Foster Clinton, King Electric LLC.


 

"I'm the main network administrator at a college in northern BC, Canada. We have used numerous Fluke Networks products over the years to help troubleshoot and design our wired networks both at the main campus and our 5 regional campuses. We have in our stock Intellitone probes, CableIQ testers and even an Etherscope. None of the guys leave to do a wiring or install job without at least one of these Fluke Networks products in their tool kit. A few of the new guys have learned the hard way that if they don't take the Fluke Networks products with them the job will be a lot harder and longer. Thanks." - Steven Dickson, Network Administrator at College of New Caledonia.


 

"Recently, we were in the big project of remodeling our data center and had to add/redo many connections to the patch panel. Intelliprobe was a great help for us to accomplish this project ahead of time w/ min impact to our business operations.This is awesome tool which data center technician MUST have!" - Paul Potapov, A&B Precision Metals, Inc.


 

"I was in Afghanistan during a major turnover of networked gear. My Fluke Networks Cable Tester helped me track down the correct ports and identify broken cables in a mess of tangles!" - Khoa Tran, USMC


 

"Spend my day tracing cables and repairing them. Been doing it for over 9 years at my current company. Majority of the breaks come from the Operating Room due to the fact that devices need to be moved and jacks get damaged. Without the Intellitone Pro I would be on a wild goose chase, with it, I am able to get devices up and running with in the hour. "- William Borgeson, Montefiore Medical Center


 

"I've been dealing with telco and network wires for over two decades. My current gigs involve showing up on a site with a network problem and getting it fixed quickly. Mostly retail stuff where the POS or credit card system is down, in other words, they are not making money. I've had the 200 for about 8 months now and it has proven its worth over and over again. I often show up at a site that I've never seen before, and let me tell you, retail installs can be really ugly. Sometimes just finding the switch or router on a site can be a challenge because the staff doesn't have a clue. This probe will find wires in walls but also show you which one in a bundle you're holding in your hand is the one you're looking for (you have to use it to understand.) The connection tester will show you what wires are missing or in the wrong position if you listen to it well, EVEN IF THERE IS ONLY ONE WIRE CONNECTED! This is a complicated but intuitive device, so intuitive that there really isn't much of a manual.. you just have to work with it for a while. Like a rather odd co-worker that is skilled but a bit strange, you'll come to love it. The guys and gals in Everett really understood what us field guys go through and need in a "toner". If you deal with CAT5 or RJ45 wiring on a regular basis, you want this. If you have a job where you show up and have to figure where a wire goes, you NEED this. I've used every toner out there (the blue Fluke beats Progressive to shame) and can do amazing tricks with them. This damn little setup is the best thing that I've ever found. I just wish that they made it 20 years ago." - Abel Magwitch, Cissyx


 

"The intelliTone Pro has time and again proven to be an invaluable tool for our Datacom technicians in the field. Whether its used for tracing out network cables or performing basic wire map tests on the fly; it's proven to be a very valuable tool for our company. The fact that the Intellitone Pro offers very precise tracing capabilities even on active network cables is an added bonus. Keep up the good work Fluke Networks." - Greg Barwinski, Owner/President at Voltcom Inc


 

"I bought this myself many years ago, and it comes out of my tool box about once a month. My company has an old non-standard building with questionable wiring I'm always looking for a bad wire in the ceiling, in the wall, or at the punchdown block and the Fluke Networks tester never fails me, I wouldn't even consider another brand Fluke Networks = Network tools. I asked my boss to buy us the OptiView XG, he offered to get us some offbrand copy, but I refused I said it would be better to wait until we had the budget and buy the right tool." - Thomas Cudd, IT Staff at Charles River Associates


 

"We use the IntellitTone Pro Toner and Probe to trace wires for both analog and digital circuits. This product is especially usefull since it allows us to use it on cable with live data." - Ryan Richards, US COURTS, Probation and Pretrial

TOP

 



 

LinkWare™ Cable Test Management Software

"I once had trouble with all the information my cable tests were giving me. I would be confused and have to manually input the data. However, since I got the Cable Test Management Software from Fluke Networks, all my problems were solved. The management software has helped me so much in my work. It organizes it well and is easy to read. It allows me to efficiently get the job done and is bug and glitch free. This product significantly improved the quality of my work." - Jeff Wu, Eatenin Inc.

TOP

 



 

MicroMapper™

"When using this product it helps my employees trouble shoot and solve complicated internal circuit problems for extreme customer satisfaction. Its easy to read display aids my staff to enable customers to get up and running faster. Overall very happy with this product!" - JoAnn Palmieri, Johnson and Wales University


 

"When I was working at Vivendi Games (now merged with Activision) we had to make our own CAT5 cables for E3 and other shows. Making them was easy enough, but your MicroMapper (or equivalent product at the time) allowed me to provide cables that I was confident were working so there was one less surprise we had to deal with at these shows." - Hans Wang, Delta Dental Insurance Group

TOP

 



 

MicroScanner² Cable Verifier

"When I first started my own network consulting and services company over 5 years ago, I knew there were a coupe of pieces of test equipment that I would need. I literally sweated each and every purchasing decision. One of the items was the MicroScanner kit. Do I buy the kit with the toner, or should I purchase a lower end product at Home Depot. I did end up buying the MicroScanner. I have since used it so many times to quickly trouble shoot so many problems with my customers. I look back at how much I sweated the original decision and I have to laugh." - Donald Jones, CEO/President/General Manager/Chairman at DONALD M JONES LLC


 

"I had received a call from our returns department that a computer and label printer had lost connection on the network. Once I had gotten to the station, I noticed that there were no link lights blinking on the computer NIC and printer. I grabbed my MicroScanner2 and connected it to the data line running to the computer first and it was showing a connection back to the switch but no link speed. Next I tested the printers connection and got the same results. I traced the 2 lines back to the switch and connect to another port on the switch and immediatly got a connection. Using the MicroScanner2 helped me rule out that there was an issue with the data cable and narrowed the issue down to the switch. Buying the MicroScanner2 from Fluke Networks has been one of the best investments that I have made because It has saved me some much time in my day to day responsabilites at work." - Grandy Jackson, Network Technician at ShopNBC


 

"I work in many of the Shopping Malls in the Pacific Northwest. Never have I found a more cut and spliced together network environment than a Mall. The MicroScanner Cable Verifier shows me the pair that has been cut and gives me the distance to that cut so I can go repare that copper line. Saves me hours every time I use it. It is part of any standard field kit I have." - Jacob Loeb, CIO/CTO/VP of IT at Computer Stores NW


 

"Hello! Well i work for a small electrical business and all we use is the microscanner2, this thing rocks! Very easy to use, rugged, very happy with your product and will continue to buy your products!" - Michael Zunti, A-1 ELECTRICAL MZ


 

"We have a somewhat unusual situation. My wife and I are building our dream home in Florida. We are both tech savvy and want our home to be energy efficient and wired for remote control of all of the home systems. Our builder is very flexible and has allowed us to run our own low voltage wiring. My wife and I ran 7,000 feet of Cat6, 2,000 feet of Cat5e and several thousand more feet of other low voltage wiring. The Cat6 wiring will be for our computer network and peripheral devices. The Cat5e is for voice, IR extenders, and window blind control. We also have wiring for RGB LED lighting. We use our Fluke Networks products (MicroScanner2 with IntelliTone Pro 200 Probe and 289 Multimeter) to ensure our structured wiring is intact and has not been compromised by any of the subcontractor work. The Fluke Networks systems are easy to use, reliable, and perform flawlessly. Sometime we just look for something to do so we can use our MicroScanner or Multimeter. Last year we were featured in BetterRVing Magazine for rewiring our RV motorhome for computer networking and surround sound. We ran over 750 feet of Cat6 in the RV for our network with 8 computers. The project would not have been possible without the MicroScanner. See the article at: http://betterrving.com/Article/RV_Living/Wired_for_the_Road" - Gerhard Sammet, Network Engineer/Analyst/Consultant


 

"Since 1992 I have been using Fluke Networks testers and cable testers, they have never failed me, I rely on Fluke Networks every day. Thank you for all your hard work and producing such quality products." - Robert Oytun, AdvancedNet Communications, Inc


 

"Starting in the early 80's I worked for Tele-resources in upstate N.Y. which manufactured PBX switching equipment, then I worked for TEL-PLUS communications as a FIELD TECH. I used a lot of different Fluke Networks test equipment, both on premise wiring installation and diagnostic problems. Now I work for the NY THRUWAY Authority also a FIELD TECH, working with COAX, CAT5, CAT6, glass and plastic FIBER OPTICS. I mainly using a Microscanner2 test kit, good old trusty multimeter, and we have a older model of the DTX / CERT test set." - Rick Mead, NYS Thruway Authority


 

"The Fluke MicroScanner2 cable verifier is a terrific network cabling diagostic tool. I went from a no-name brand "which pins are connected" tool to this beauty. It not only tells you which pins are connected, and how long the cable is ... if there's an issue with the cable, it tells you the issue (open or short) and how far down the cable the issue occurs. It is also a tone generator. It works with Cat3, Cat5, Cat6, and coax and tests up to 1000 MHz. I won't go to a cabling job without this handy gadget. I got it from Amazon.com at a great price ... I received it quickly and without issue." - Perry J, Homeville

TOP

 



 

MultiFiber™ Pro Optical Power Meter and Fiber Test Kits

"We started certifying our new 12 strand MPO to MPO fiber using breakout cables and a basic fiber meter. We calculated the time we would save by testing all 12 strands at once and it became obvious of the value of your Fluke Networks MPO fiber meter. The ROI on this meter is achieved very quickly in a large MPO fiber project. This is a great product. Thank you." - Douglas Eide, National Arts Centre

TOP

 



 

OMNIScanner Series

"With running tons of cable in large universities my company and I use the IntelliTone to trace our cables back to the IDF rooms. Then with all of our fiber we test with the Cable Analyzer and test CAT6,5e,etc with our Omniscanner (which has lasted us for what seems like forever). We also have a megohmmeter that we use occasionally to test the resistance in medium voltage cables. My company has always bought Fluke Networks products because they are reliable, accurate and the usage of the products are intuitive and easy to operate. " - Foster Clinton, King Electric LLC.

TOP

 



 

OptiFiber® OTDR Optic Cable Tester

"The Fluke Networks Cable Tester has helped me many times when I could not find a cable or in a middle of a migration to cut over new equipment. I have used the cable tester many times to find where the other ends of the cables are and also to test the cabling. The Fluke Networks Cable Tester has been an invaluable tool during setting up new cabling, troubleshooting and during migrations." - Gordy Hum, Analyst at Canaccord Financial.

TOP

 



 

OptiFiber® OTDR Optic Cable Tester

1.) Enter problem here.
2.) Break out any one of our wonderful Fluke Networks products.
3.) Problem fixed.
"Seriously, our Fluke Networks products are like gold around here. Everybody uses the Fluke Networks products to quickly gain info about the network. Fluke Networks makes us awesome. THX! "
- Chris Burns, Network Eng. Team Leader at DST Systems, Inc.

TOP

 



 

OptiFiber® Pro OTDR

"My Fluke Networks equipment is invaluable in my day to day environment where anything can and will go wrong, and must be addressed and corrected immediately. My Fluke Networks test equipment helps me pinpoint the and identify the cause of any and all network issues in no time at all!" - Richard Forbes, Network Engineer/Analyst/Consultant at NJ Transit


 

"The OptiFiber Pro gives me the assurance of network stability and performance. Without Fluke Networks backing up my fiber installations I wouldn't be able to trust its performance as willingly. Fluke Networks Optifiber Pro give me the piece of mind I need to operate our business. " - Trevor Hale, AuRico Gold


 

"I recently got a job with Toyota, and I was responsible for working with the network. We wanted to work with something more advanced and something that will last us into the future, so I worked with our information systems department. I started out with buying the OptiFiber Pro OTDR and it worked like a charm. I didn't come about Fluke Network early on, but I wish I did. There are many varieties of products that we may be interested in, and I look forward to see what FlukeNetworks has to offer. " - Mubeen Ahmad, Toyota Motor Manufacturing

TOP

 



 

Pocket Toner®

"This product really helped me have an easier and more convenient life. When it came in the mail, I was so excited I ripped open all the packaging because I knew something amazing was inside. This product has helped me so very much in just the short time I've had it. Please continue to make such wonderful things such as this." - Mim Hayat, Hayat Industries


 

"We needed to heat up a ton pof old ports in a old casino, the ONLY way we made sense of the cabling was the toner. No way I'm headed out to a site without it now!" - Erin Howe, Chickasaw Nation


 

"This little tool really helps our Accommodation Department. We are responsible to move and relocate Employees and part of this is to make sure that Phone lines and network are active when people are ready to more. This tool is easy to use and is small to carry with us as appose to having to bring a phone and a laptop to make sure all is working. This tool is saving us a lot of time." - Carl Sarazin, Health Canada

TOP

 



 

Pro3000™ Analog Tone and Probe

"I use this product in an industrial environment to trace control circuits of machinery and equipment, most of which does not have a circuit print or circuit log. It is an invaluable aid for this purpose. The advantage it gives, over conventional continuity testers, is: 1) the ability to trace a circuit through one of several conduits so I don't end up opening 10 different junction boxes to find out if the circuit I'm looking for is in here. 2) I can trace circuits without assistance, and usually faster than using conventional methods with two people. 3) I was able to locate a severed conductor inside the conduit run. The only disadvantage I have found with this tool; it gets lonley in the tool box and goes looking for human attention, therefore when I go to get it I have to search and usually find it in the hands of one of the other five technicians in our facility." - JOHN PENA, JPCOMPUSOLUTIONS

TOP

 



 

TS® 100 Cable Fault Finder

"Great products! Really helps with troubleshooting and keeping networks efficient. Will be making purchases from you in the near future! Your engineers know their stuff and it shows. The fact that you also offer these new products at a light weight really helps also!" - Andrew DiSogra, Gateway


 

"I ordered the cable fault finder to include as part of my tool kit, along with my Fluke Networks 87B and 88A. Troubleshooting cables has never been easier! This potentially takes hours off fixing a problem if I can avoid having to re-run the cables." - Andrew Cloptom, Cloptom Sciences Inc.


 

"I used this to find issues in my network, it has saved me tons of time using this tool, versus manually checking/changing cables." - Brad Hooper, 4th Dimension Computers.

TOP

 



 

TS® 40 Series Test Sets

"The TS40 Series test set is my most used gadget. Dropped from 25 feet high once and still going." - Philip Huber, Repair Technician at Eastlink

TOP

 



 

TS® 52 PRO Test Sets

"I use it every day! Takes a fall and doesn't even phase it. Convenient and economical too!" - Bill Denison, Frontier

TOP

 



 

TS® 53 PRO Test Sets

"I am a Foreman/ Carpenter and am in charge of 3 jobs right now. We are building a veterans home, updating a hotel and working at City Hall. Unfortuanately for me these jobs are all running at the same time and I of course need to oversee them all. Since I cannot be in 3 spots at one time, I purchaset the TS 53 PRO phone for my job sites so that I can stay informed at all times on the progress from my workers. I have never had such good reception and clear voice quality on any other phone I have ever owned. They are waterproof so that if it is raining or snowing I do not have to worry about them breaking. THEY ARE AMAZING!! I will never use ANYTHING ELSE and have put out the word to alot of the workers in the unions around here. You have helped me stay good at what I do by being available to all of those who depend on me. THANK YOU SO MUCH!!" - Eric Clark, Carpenter/ Philadelphia Carpenters Union Local #1856

TOP

 



 

TS® 54 TDR Test Set

"I am quite clumsy and have previously broken test sets. The fact that this test set is rated for toughness and durability is a fantastic feature. Also, the familiar interface allows for ease of use like never before. After using this product, I am a changed man." - Ben Branch, Branch Home Services

TOP

 



 

TS® 90 Cable Fault Finder

"Starting in the early 80's I worked for Tele-resources in upstate N.Y. which manufactured PBX switching equipment, then I worked for TEL-PLUS communications as a FIELD TECH. I used a lot of different Fluke Networks test equipment, both on premise wiring installation and diagnostic problems. Now I work for the NY THRUWAY Authority also a FIELD TECH, working with COAX, CAT5, CAT6, glass and plastic FIBER OPTICS. I mainly using a Microscanner2 test kit, good old trusty multimeter, and we have a older model of the DTX / CERT test set." - Rick Mead, NYS Thruway Authority.


 

"I had about 500 feet of buried coaxial cable that was giving me problems, and I couldn't find where the problem was. The Fluke TS90 gave me about a ten foot range of where the problem might be, which was much more reasonable to deal with. I dug up the cable at the spot and respliced it. The problem was fixed and my coaxial cable stopped giving me trouble!" - Kyle Evans, Evans Co.


 

"I am involved in new and repair cabling, having the TS 90 Cable Fault Finder, is just one of great tools Fluke Networks has to offer. The 3 tools in 1, this tester helps me installing new cables, by testing the line to make sure there is no break in the cable as I am pulling the cable. Fault Locator, is saving me time in the repair work. Finding the problem fast for the customer, they are up and running. Cable and Wire Manager, helps me in managing wire inventory of the wire and billing out to the customers, wire lengths to charge out. If you install cabling, you need to have 1 of TS models in your tool bag." - Andrew D'Cruz, AMD Security & Hardware


 

"The Fluke Networks TS90 has become our go to TDR solution for daily troubleshooting. Its simplicity, durability and speed are unmatched. The TS90 can be used by anyone regardless of experience level to quickly find faults, saving time and money. The small form factor makes it easy to carry and utilize in a variety of situations. This product is a necessity for any technician." - Jonah Boylen, Eastlink Cable

TOP

 



 

VisiFault™ Visual Fault Locator - Cable Continuity Tester

"I work in the buried wire departmet for Verizon's FiOS service. I can't tell you how many times this tool has been used to clear a drop that was deemed "defective" by an installer. 9/10 times it ends up being a bad splice." - Bryan Gibney, Verizon


 

"This little nifty items saves us $1000 per year since we can very simply test our own fiber very quickly. This isn't testing for db lose or anything fancy - but just to be able to identify light or no light keeps us from turning everything over to a contractor for repair. I never thought it would be as usefule as it is. Amazing how something so simple can help." - Dianna Drew, GPISD

TOP