Testing a cross over cable with the PentaScanner | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  PentaScanner

Testing a cross over cable with the PentaScanner

The last PentaScanner left the factory back on March 31, 2004. We regret to say support ended March 31, 2008. It's replaced by the Versiv familly of testers.
  
Unfortunately, you cannot configure the Autotest to test either a cross over cable (swap cable) or a link with a cross over cable in it.
 
You can verify the Wiremap though.

Author: Fluke Networks

Creation Date: 2014-02-26

Last Modified: 2014-02-26