|The OMNIScanner allows the user to create Custom Fibers in the OMNIScanner. This is useful if the customer has a fiber that is not in the Cable Library. |
With the OMNIFiber adapters attached to the OMNIScanner, turn the OMNIScanner on. Press the Setup key . From the Setup screen, Select Cables and press Enter.
From the Cables menu, select Generic and press the Enter key. Highlight the type of fiber that is to be created.
Multimode 50/125 micron
Multimode 62.5/125 micron
To start creating the Custom Fiber, press the Create button .
Highlight the Name Field and press Enter. Enter the name of the Custom Fiber using the OMNIScanner Keypad. When done entering the name, press Enter.
Use the Arrow pad and move down to the GRI @ 850 field. Press Enter and change the value using the OMNIScanner Keypad. When done entering the new value, press Enter.
Use the Arrow pad and move down to the GRI @ 1300 field. Press Enter and change the value using the OMNIScanner Keypad. When done entering the new value, press Enter.
If creating a Single-Mode Fiber, change the Fiber Type to Single-Mode.
When done editing the Custom Fiber, press the Save button . The Custom Fiber will be saved in the Custom Cables folder. From there the Custom Fiber can be selected and set as default by pressing the Set As Default button .