Method C Reference - DSP FTA Series | Fluke Networks

Knowledge Base

KB Home   >  Fiber Testing   >  DSP-FTA Series

Method C Reference - DSP FTA Series

This method is suitable if you wish to test the link but not the connectors.
1) Setting the reference:

2) Connect to the fiber link to be tested:

The adapter count in the DSP in this case should be 0; there are no adapters per fiber ADDED AFTER the reference was set.
Ask yourself the following questions: 

  • How many adapters were used in the reference per fiber? 2 
  • How many adapters are there in the link under test? 2 
So the adapter count is 2 - 2 = 0 

Author: Fluke Networks

Creation Date: 2014-02-28

Last Modified: 2014-02-28