We all know that Ethernet is the de facto physical layer communication protocol for data transmission between devices in a local area or wide area network. It has evolved over the years to deliver higher levels of performance while maintaining backwards compatibility, reliability and relatively low cost, which is why it has maintained its popularity.
April 2, 2020
The Modular Plug Terminated Link, or MPTL, where a horizontal cable run terminated on one end to an RJ-45 plug connects directly into a device, has become increasingly popular for connecting a variety of devices—from wireless access points and security cameras, to PoE lights and video displays—essentially wherever it’s deemed impractical or unsafe to deploy an outlet and equipment cord.
March 26, 2020
Likely you’ve noticed that cable, patch cords and connecting hardware from reputable manufacturers are promoted and labeled as third-party certified, verified or listed. Third-party certification is an extremely important part of our industry, giving you peace of mind that your chosen manufacturer has independently determined that their products comply with industry standards.
March 20, 2020
Since the last standards update, I represented Fluke Networks and attended the TR42 meeting in New Orleans and the SC25 WG3 meeting in Sydney Australia. The following are some of the highlights worth noting.
March 9, 2020
Our last post covered the technologies for Wi-Fi 6 and 6E. If you’ve decided that you want some of that good stuff in your network, you need to make sure your cabling plant is ready.
March 5, 2020
In the first of this two-part post, we’ll discuss the new and upcoming Wi-Fi 6 standards and the performance benefits. Our subsequent post will cover how to make sure that your cabling plant is ready.
February 27, 2020
Last month, we published a blog about the various industrial Ethernet connectors including M-series and some new small form factor connectors like the iX and emerging single-pair Ethernet connectors. But what good is a connector designed to withstand the industrial environment without a cable that offers the same protection?
February 20, 2020
Industrial Ethernet is very sensitive to delays caused by dropped or damaged data frames (sometimes called packets). Just a few dropped or damaged packets can cause a machine to shut down. These problems are often intermittent and can be caused by harsh industrial environments.
February 13, 2020
Planning to attend the upcoming BICSI Winter Conference & Exhibition on February 9-13 at the Tampa Bay Convention Center in Tampa, FL?
Fluke Networks is offering plenty of educational opportunities to learn all about fiber, Industrial Ethernet and more. And you can stop by the Fluke Networks’ Booth #310 during exhibiting hall hours for hands-on demonstrations and one-on-one time with our experts.
February 6, 2020
Have you ever carefully calculated insertion loss during the design phase and then passed your permanent link testing after installation only to find out that the channel isn’t performing once it went live?
January 30, 2020