Screen is too dark (black) or too light (white) - DSP 4x00 CableAnalyzer | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  DSP-4x00 CableAnalyzer™

Screen is too dark (black) or too light (white) - DSP 4x00 CableAnalyzer

You need to adjust the contrast. To do this, switch on the unit, press and hold down the Back Light Key. You will then see the following:
 
DSP 4x00 CableAnalyzer Contrast Adjust Screen
 
Using the up and down blue cursor keys, you can then adjust the contrast. When you have finished, press the Back Light Key again.
 
In cold conditions, the contrast is affected. The DSP-4000 Series contains a thermistor which adjusts the contrast of the LCD. If the DSP is cold and you switch it on, you may see a dark screen. Within 2 seconds it will adjust itself automatically to a suitable contrast.

 

Author: Adrian Young

Creation Date: 2014-02-17

Last Modified: 2014-02-17