Main Adapter does not support the test standard selected - DSP 4x00 CableAnalyzer | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  DSP-4x00 CableAnalyzer™

Main Adapter does not support the test standard selected - DSP 4x00 CableAnalyzer

If you have the Channel Adapter attached, you must have one of the Channel Standards selected in the SETUP such as TIA Cat6 Channel. Likewise, if you have the Permanent Link Adapter attached, you must have one of the Permanent Link Standards selected in the SETUP such as TIA Cat6 Perm. Link. If not, you will see an error message such as that shown below: 

DSP-400 CableAnalyzer Test Standard Not Supported Message

Also make sure you have the latest software x.925 in the DSP CableAnalyzer. You can find this here. Having an old version of firmware can also trigger the above error message. 
  
 


 

Author: Adrian Young

Creation Date: 2014-02-06

Last Modified: 2014-02-06