Error Messages - DSP 4x00 CableAnalyzer | Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  DSP-4x00 CableAnalyzer™

Error Messages - DSP 4x00 CableAnalyzer

Your instrument continuously checks itself. If anything is a miss, an error code is shown on the display and the error is logged to its internal memory. You can view any errors logged through LinkWare PC Software.
 
To do this, open LinkWare PC with your DSP connected to the PC and switched on. Click on Utilities > DSP-4x00/LT Utilities > Software Version.
 
Highlighted LinkWare PC Software Version Menu
 
You will see the following screen:
 
LinkWare PC Software Version Screen 
 

Error code 1001(1) is a communication error between the DSP and the PC. This error code is caused by incompatible DSP-4x00 firmware & LinkWare PC Software.
 

Click here for the latest version of and final  DSP-4x00 firmware (x.925)

We regret to say we are no longer able to offer calibration and repair for the DSP-4x00 CableAnalyzer. It has been replaced with the DTX CableAnalyzer.

Author: Adrian Young

Creation Date: 2014-02-03

Last Modified: 2014-02-03