Category 6A, 6 and 5e Connector Hardware Testing ANSI/TIA-568-C.2|Fluke Networks

Knowledge Base

KB Home   >  Copper Testing   >  Application or Standards Articles (Copper)

Connector hardware testing

The following information is intended for connector manufacturers only, who need to verify the performance of their jacks in accordance with ANSI/TIA-568-C.2. These files have been consoliated to aid downloading.

Disclaimer: These documents represent the best interpretation of the TIA Cat 6A connecting hardware test procedure as in Addendum #10 to TIA/EIA-568-B.2 (ANSI/TIA-568-C.2) by the authors, but cannot be guaranteed to be fully accurate. The user should obtain the TIA standard and verify that this representation is correct. Fluke Networks welcomes comments on these documents, but is unable to comment on any submitted test data. Updates will be made without announcement. Newer revisions will be shown by their dates as shown above.

Author: Sandhya Chate

Creation Date: 2014-01-28

Last Modified: 2014-01-28