 |
| Test and Troubleshoot |
 EtherScope™ Series II Network Assistant AirCheck™ Wi-Fi Tester NetTool™ Series II Inline Network Tester CableIQ™ Qualification Tester LinkRunner™ Pro & Duo Network Multimeter LinkRunner™ Network Multimeter IntelliTone™ Pro Toner and Probe OneTouch™ Series II Network Assistant |
|
| |
|
|
|
IntelliTone™ Pro Toner and Probe
Specifications |
|
| GENERAL SPECS |
|
Operating temperature |
32 °F to 104 °F (0 °C to 40 °C)
|
|
Storage temperature
|
-4 °F to +140°F (-20 °C to °C)
|
|
Operating relative humidity (% RH without condensation)
|
95 % (50 °F to 95 °F; 10 oC to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
|
|
Vibration
|
Random, 2 g, 5 Hz-500 Hz
|
|
Shock
|
1 m drop test with and without module
|
|
Safety
|
EN 61010-1 1st Edition Amendments 1, 2
|
|
Altitude
|
3000 m
|
|
EMC
|
EN 61326-1
|
|
Battery type and life
|
9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
|
|
Applications
|
Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. POTS telecom service and UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.
|
| TONER SPECS |
| Dimensions |
5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
| Display |
LED |
| Control |
Thumbwheel switch |
| Toner interface |
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring |
| Toner frequency |
IntelliTone™ signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs |
| Talk battery voltage |
6 V into 600 W |
| Ouptut power |
5 V p-p |
| Voltage protection |
100V |
| Auto power down |
Turns off automatically after 2 1/2 hours of inactivity |
| PROBE SPECS |
| Dimensions |
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
| Display |
(8) LED indicators, Synch LED indicator |
| Audio |
IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal |
| Control |
Thumbwheel switch, volume control wheel |
| Tone detection |
Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners. |
| Toner interface |
Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling. |
| Auto power down |
Turns off automatically after 1 hour of inactivity |
|
|
|
|
|