New! - Monitor the core and troubleshoot the access layer with OptiView analyzers
Learn how to use the OptiView Series III portable analyzer and new Series III Workgroup Analyzer to plan for new application deployment, manage against internal security threats, diagnose network problems, prove it’s not the network, and analyze application problems. View Webcast

New! - Leveraging Your Existing Infrastructure Through Software Monitoring Technologies : NetFlow Tracker and ResponseWatch utilize the capabilities already inherent in your network infrastructure, including NetFlow, IPFIX, jFlow and sFlow.  These affordable and effective approaches are especially appropriate for remote sites that might not otherwise justify the cost of coverage.  Learn how you can use software-monitoring technologies to maintain optimal network performance.  View Webcast
 
New! -  Understanding the Impact of Change for MPLS Networks:  Many organizations are migrating to IP-based networking including MPLS to improve overall application performance through any-to-any connectivity and service prioritization. During this webcast, we will show you have to understand the impact of change for MPLS-based networks. View Webcast

New! - Monitoring & Improving Application Performance across your Company:   Application slowdowns, bottlenecks, response time issues - whatever you call them, are among the most challenging issues for IT organizations to monitor, resolve and prevent from happening again. During this webcast, we will review methods and strategies for resolving all of these issues. View Webcast
 
New! - Effectively Manage Application Performance using Visual Performance Manager: Enterprise wide performance problems have become so difficult to pinpoint that IT Managers must call upon their most seasoned network engineers to sift through reams of data to determine the cause of application performance.  During this webcast, we'll share examples of how Visual Performance Manager can solve many of these issues efficiently and reduce the finger pointing.  View Webcast
 
New! - See Your Traffic Performance Using Capabilities Already Inside Your Cisco Network
Which would you prefer? To hear about a new problem first from a call to your help desk or see the potential issue on a dashboard before it causes complaints?  By seeing actual traffic performance, you can act proactively to prevent complaints before they happen.  Using Fluke Networks' ResponseWatch software, you can comfortably watch your personal dashboard of application and network segment performance and know the status of your entire network with one glance.

New! - Manage and Secure Your WLAN
Learn how to successfully manage and secure your wireless network. You’ll see how to verify and optimize wireless coverage and performance, troubleshoot connectivity and authentication issues and identify and locate rogue devices.

VoIP Expansion Deployment Planning
In this webcast, you will see how to assess your existing network performance for the VoIP expansion deployment phase, troubleshoot phone connectivity and call quality issues and do a post deployment assessment.

Data Center Challenge – Troubleshooting in the Core
Within most companies, all application traffic leads back to the core. At this point, we are most likely to be able to identify the cause of application slowdowns and outages. In this webcast, we will explore a variety of techniques used to monitor traffic, identify the top applications, and quickly hone in on those that are having problems.

Don't gamble with SNMPv3: Make sure your upgrade improves security with these best practices
Many IT professionals are choosing to harden their management systems by incorporating protection mechanisms like those offered in SNMPv3. Attend this webcast to learn about the advantages of SNMPv3 and learn best practices to prepare for and deploy this new secure protocol.

Troubleshooting Core Network & Enterprise Data Centers
See how data center and core network changes have impacted the way  networks and applications are supported.  What solutions are being used and how do they help troubleshoot.  The implementation of 10Gigabit and high availability architectures are especially pertinent and will be discuseed.

Network documentation simplified
Learn how easy it is to provide baseline network documentation throughout the life of your network.
 
Improving network visibility for the OptiView Integrated Network Analyzer
Effective access for network analysis using the OptiView analyzer requires the latest generation of tapping technology that includes regeneration, filtering and aggregation.  See how new network access technology for test and measurement solutions, like the OptiView Integrated Network Analyzer, can help increase the value and effectiveness of this solution. 

Determining the cause for poor application performance
Best practices and common root causes of application problems using case studies and live network traffic.

Deploying VoIP, wireless and applications efficiently
Learn how to implement new technologies and applications with minimal distruption and continue to deliver a high level of service.
 
Throughput Testing: How to make sure your network is operating at top speed
Even though you may have a Category 5e/6 cabling system, and your switches may support Gig, that doesn't mean you're going to get Gigabit speed throughout your network. Learn how to test a newly completed or existing system by running data across it and reviewing the results.

Correlating granular network and application visibility for improved performance
IT organizations today are facing more challenges than they have in the past decade.  Migration to MPLS, more mission-critical applications, VoIP and video deployments and workforces moving away from headquarters.  This webcast will focus on how to measure quality of experience, and understanding how application performance can be impacted by the network and vice-versa.

Managing VoIP across the WAN
Having a strategic plan in place for VoIP performance management with visibility from edge-to-core throughout your VoIP lifecycle is imperative to managing a network successfully. This informative web cast is an in-depth discussion on Managing VoIP across the WAN with Visual UpTime Select. We will cover the issues and challenges that arise when managing VoIP across a WAN-based network.

VoIP & MPLS - Making it work for your company
MPLS-based networks and VoIP are two of the hottest topics for networking professionals worldwide. In this webcast we will highlight how pre-assessment and post-deployment visibility can help enterprises understand the impacts of VoIP and MPLS and how to deploy successfully.

Understanding Private IP/MPLS based networks
Over the past several years, service providers have been rolling out private IP/MPLS-based network options for their customers. We will show you the benefits of private IP and how performance management with Visual UpTime Select can help you optimize the benefits associated with private IP while limiting the challenges of migrating. 

Application and Network Performance Management from a Data Center Perspective
Poor application performance is a problem with negative effects throughout a business, from reduced employee productivity to increased customer dissatisfaction and loss of business.  Find out how you can use SuperAgent to monitor end-user application response times and identify the source of delays, all without the deployment of desktop or server agents.

A Case Study - A real life scenario of migrating to an MPLS-based network
When it comes to deploying an MPLS-based network as the primary WAN services, many enterprises have concerns and fears whether they are just considering an MPLS deployment or are trying to manage the new private IP VPN connectivity across the entire enterprise.  We walk through a real-life case study for an organization of over 200 locations that recently migrated from a frame relay and ATM infrastructure to an MPLS-based networking solution.

Understanding and Leveraging Cisco IPSLA's
More and more companies are realizing the benefits of leveraging embedded data sources, such as Cisco IOS NetFlow and IP SLA's to better understand and improve performance.  Get a better understanding of IP SLAs and how they can be combined with other embedded data sources to provide you with the information you need. 

Testing 10 Gig Infrastructure
An overview of the new standards on the performance requirements of twisted-pair cabling system and the resulting field test requirements. Learn about the state-of-the-art testing methodology, and the recommended design and installation practices to yield successful achievement of the transmission requirements for 10GBASE-T.

Standards Overview
Learn about TIA/EIA-568-C: The next-generation cabling standard and get an update on TSB-155 and 568-B Addendum 10: The 10GBase-T specifications.

Field Testing of Datacom Twisted-Pair Cabling: Why Certify (Part 1)
This webcast describes and clarifies the need for and the benefits of certifying the performance of nstalled cabling systems.

Testing and Troubleshooting a Premises Fiber Network with OTDR Technology 
See how OTDR technology can help identify infrastructure problems and increase the quality of your fiber installations. In this one-hour webcast you’ll learn why you should use an OTDR, how an OTDR is used, and get a glimpse into two-tier testing using Fluke Networks’ OptiFiber Certifying OTDR.