 |
| Analysis and Monitoring |
 OptiView® Network Analyzer EtherScope™ Series II Network Assistant AnalyzeAir™ Wi-Fi Spectrum Analyzer NetAlly® Application Advisor ClearSight™ Analyzer Network Time Machine™ OptiView® Protocol Expert OptiView® Link Analyzer XLink Analyzer OptiView® OC3/OC12 WAN Analyzer Tap Solutions |
|
| |
|
|
|
OptiView® Network Analyzer
Specifications |
|
OptiView Series III Integrated Network Analyzer (portable)
General specifications |
|
Weight |
Without external battery 2.2 kilograms (5.0 lbs)
With external battery 3.0 kilograms (6.6 lbs.) |
|
Dimensions |
26.0 x 23.4 x 6.4 centimeters (10.3 x 9.2 x 2.5 inches) |
|
Display |
LCD trouch screen, 800 x 600 pixels, active color panel, CCFT back-light and bezel, touch pad |
|
LED Indicators |
16 (21 with external battery) |
| Power |
| Internal battery |
Lithium Ion 11.1 V DC (nominal), 2 Ah |
| External battery |
Lithium Ion 11.1 V DC (nominal), 6 Ah |
| External AC adapter/battery charger |
AC input: 120 V – 240 V, 50/60 Hz, 1.5 A
DC output: 15 V, 4.0 A |
| Ports |
| Communication and accessory ports |
3 USB, 1 PC Card type II, 1 VGA out 15-pin connector |
| Network analysis ports |
RJ-45 10/100/1000BASE-T Ethernet, fiber 1000BASE-X SFP GBIC |
| Network Standards |
| LAN interfaces |
IEEE 10BASE-T, IEEE 100BASE-TX, IEEE 1000BASE-X |
| Standard SNMP MIBs used |
RFCs: 1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 2021, 2108, 2115, 2127, 2495, 2515, 2558 |
| Media |
| Cable Types |
Unshielded Twisted Pair LAN cables (100 and 120 Ohm UTP category 3, 4, 5, 5E, and 6 ISO/IEC Class C and D); Foil-screened Twisted Pair cables (100 and 120 Ohm ScTP category 3, 4, 5, and 6 ISO/IEC Class C and D) |
| Cable Length1 |
1 to 153 m (3 ft to 500 ft) +/- 2 m (6 ft) |
| Environmental and safety |
| Operating temperature2 |
10°C to 30°C (50°F to 86°F) with up to 95% Relative Humidity
10°C to 40°C (50°F to 104°F) with up to 75% Relative Humidity |
| Non-operating temperature |
-40°C to +71°C (-40°F to +159.8°F) |
| Altitiude |
Operates up to 4600 m (15091 ft) |
| Approvals |
AC adapter/charger has UL, CSA, CE, SEMKO, CCIB, BCIQ and GS approvals |
| Shock and vibration |
Meets requirements of MIL-PRF-28800F for Class 3 equipment |
| Laser |
Class 1 Laser Product, complies with 21 CFR 1040.10 and 1040.11, CFR(J) |
| Safety |
(CSA) Complies to CSA C22.2 No. 950 (Canadian standards), and UL 1950 (US standards) (CE) Complies with European Union directive EN60950 |
1 Length accuracy is dependent on the cable type selected in the Cable Test screen with its ideal NVP (nominal velocity of propagation) matching the NVP of the cable under test
2 Battery will not charge below 12°C (53.6°F)
OptiView Series III Workgroup Analyzer (rack mount)
General Specifications |
|
Weight |
1.63 kilograms (3.6 lbs) |
|
Dimensions |
4.1 x 21.1 x 32.8 cm (1.6 x 8.3 x 12.9 in), one half of a standard 19 in rack mount width |
|
LED Indicators |
6 |
| Power |
| AC |
AC input 85 to 265 VAC; 47/63 Hz; 25 watts |
| Ports |
| Communication and accessory ports |
Serial Configuration Port RS-232 (9-pin male) |
| Network analysis ports |
RJ-45 10/100/1000BASE-T Ethernet, fiber 100/1000BASE-X SFP GBIC |
| Management port |
10/100/1000BASE-T (RJ-45) Ethernet |
| Network Standards |
| LAN interfaces |
IEEE 10BASE-T, IEEE 100BASE-TX, IEEE 100BASE-FX, IEEE 1000BASE-X |
| Standard SNMP MIBs used |
RFCs: 1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 2021, 2108, 2115, 2127, 2495, 2515, 2558 |
| Media |
| Cable Types |
Unshielded Twisted Pair LAN cables (100 and 120 Ohm UTP category 3, 4, 5, 5E, and 6 ISO/IEC Class C and D); Foil-screened Twisted Pair cables (100 and 120 Ohm ScTP category 3, 4, 5, and 6 ISO/IEC Class C and D) |
| Cable Length1 |
1 to 153 m (3 ft to 500 ft) +/- 2 m (6 ft) |
| Environmental and safety |
| Operating temperature |
10°C to 30°C (50°F to 86°F) with up to 95% Relative Humidity
10°C to 40°C (50°F to 104°F) with up to 75% Relative Humidity |
| Non-operating temperature |
'-20°C to +60°C (-4°F to +140°F) |
| Approvals |
| Shock and vibration |
Meets requirements of MIL-PRF-28800F for Class 3 equipment |
| Laser |
Class 1 Laser Product, complies with 21 CFR 1040.10 & 1040.11, CFR(J), and EN60825-1:1994/A1:1997/A2:2002 |
| Safety |
Complies with CSA C22.2 No. 950 Canadian standards, and UL 1950 (US standards) (CE) Complies with European Union directive EN60950 2nd edition. |
OptiView Reporter - PC Specifications
The minimum system requirements needed to run the application on your PC are: |
|
Operating system |
Any of the following: |
|
|
Windows 2000 Professional SP4 or later
Windows 2000 Server SP4 or later
Windows 2000 Advanced Server SP4 or later
Windows XP Professional SP1 or later
Windows 2003 Enterprise Server SP1 or later
Windows 2003 Standard Server SP1 or later
Windows Vista Business (32 bit) |
|
Languages |
On any of the supported Operating Systems |
|
|
English
German
Japanese
Simplified Chinese |
|
System RAM |
512 MB |
|
Processor |
Pentium III Compatible, minimum 1 GHz |
|
Browser |
Windows Internet Explorer 6.0 or later |
|
Disk space |
System space 400 MB
Install space 850 MB |
|
|
|
|
|