Specifications

Weight

1.2 kilograms (2.8 lbs.)

Size

(H x W x D): approx. 4.1 cm x 21.1 cm x 32.8 cm (1.6" x 8.3" x 12.9")

AC input

100 to 240 VAC; 47/63 Hz; 25 watts. Blue power LED indicator.

Test Access

Full duplex monitoring through a monitor port or tap connection

Layer 2 Support

Asynchronous Transfer Mode (ATM) and Packet over SONET (PoS)

Network Analysis Interfaces

OC3 and OC12, SM or MM (SC)

Network Analysis LEDs

Signal Status (IN A and IN B)

Receive Sensitivity

OC3/OC12 WAN Analyzer: -30 dBm (typical) OC3 WAN Analyzer: -36 dBm (typical)

Capture Memory

256 MB (shared between receivers)

Serial Configuration Port

Serial RS-232 (9-pin male)

Management Port

10Base-T/100Base-TX (RJ-45) Ethernet, Full and Half Duplex

Management Port LEDs

Link/TX (solid green for link and flashing green for activity)

Shock and vibration

Meets requirements of MIL-PRF-28800F for Class 3 equipment

Operating Temperature

10° C to 30° C (50° F to 86° F) with up to 95% relative humidity

10° C to 40° C (50° F to 104° F) with up to 75% relative humidity

Non-Operating Temperature

-20° C to ° C (-4° F to 힍° F)

Connection to public telephone network: Do not connect the analyzer's network interface to public telephone systems.

Framing Formats: SDH (STM-1 and STM-4) ITU G.707; SONET: (STS-3c and STS-12c) GR-253-CORE, ANSI T1.105

RFC Compliance: 2684 (obsoletes 1483) Multiprotocol Encapsulation over ATM Adaptation Layer 5; 2364 PPP Over AAL5; 2819 (obsoletes 1757) RMON MIB; 2021 RMON2 MIB; 2895 RMON Protocol Indentifier Reference; SMIv2 [2011 IP, 2012 TCP, 2013 UDP]; 2558 (obsoletes 1595) SONET/SDH MIB; HC-RMON-MIB (IETF draft) RMON for High Capacity Networks; RFC 2233 (obsoletes 1573) IF-MIB.

ATM Forum IEs: AF-NM-TEST-0080.000 ATM RMON MIB objects

Environmental and Safety

Complies with CSA C22.2 No. 950 Canadian standards, UL 1950 US standards, and EN60950 3rd edition (CE Mark). Class 1 Laser product.

EMC: CE Complies with EN61326 Class A.

PC System requirements for user interface

Operating System

• Windows® 2000, Windows® Server 2003 or Windows® XP
• Microsoft TCP/IP Stack
• Winsock 2.0

Physical Requirements

• 200 MHz Pentium processor
• 128 MB System RAM (running multiple instances of the software requires more memory; typically 16 MB per session)
• 800 x 600 Video SVGA display
• 120 MB hard drive space
• CD-ROM drive.