|
|
 |
|
MetroScope™ Service Provider Assistant
Specifications |
|
| General Specifications |
| Weight,with battery |
0.86 kg (1.9 lb) |
| Dimensions |
19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in) |
| Display |
LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad |
| LED indicators |
6 (including power LED) |
| Carrying Case |
Rugged carrying case with two removable pockets, camcorder strap and adjustable strand hook |
|
| Power |
| Battery |
Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable |
| Battery life |
4 hour typical, 10 hour in standby mode |
| External AC adapter/battery charger |
AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A |
| |
DC output: 15 V dc, 1.2 A (isolated output) |
| Auto Charger |
12V “cigarette lighter” charger with 6 foot (1.8 m) fully extended coiled cord and LED power indication |
|
| Ports |
| Communication and accessory ports |
1 USB, 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle |
| RJ-45 / Copper Port |
RJ-45 10/100/1000BASE-T Ethernet |
| Fiber Port |
Small Form-factor Pluggable (SFP) in accordance with MSA |
| Supported SFP Modules |
1000BASE- LX, SX, ZX, BX, 100BASEFX |
| SFP Connector |
Duplex LC |
|
| Environmental and safety |
| Operating Temperature |
0° to +50°C (32° to 122°F) with up to 95% relative humidity |
| Battery Charging |
10° to +40°C (50° to 104°F) with up to 95% relative humidity |
| Temperature |
|
| Storage temperature |
-20° to +60°C (-4° to 140°F) |
| Shock and vibration |
Meets requirements of MIL-PRF-28800F for Class 3 equipment |
| Safety |
CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter.
EMC Complies with EN61326, Class A, Criteria C |
|
| Copper media |
| Cable types |
Unshielded twisted pair LAN cables (100 and 120 Ohm UTP) |
| |
Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP) |
| Cable length |
1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected |
| Length resolution |
± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection = 20% |
| Receive level |
100 to 5000 mVp-p |
| Datalink signal |
500 to 4000 mVp-p |
| Measuring terminated cables |
The Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal. |
| Wiremapper/office locator compatibility |
Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator. |
| Fault tolerance |
The RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts. |
|
| Fiber optic power measurements |
| Receive Input Power, Transmit Output Power, Temperature, Voltage, TX Bias Current |
Real time access to digital diagnostic monitoring of SFP operating parameters in accordance with the SFP Multi Source Agreement (MSA) and SFF-8472. |
|
| Performance Tests |
| Compatible remote devices |
MetroScope, LinkReflector, EtherScope |
| RFC-2544 Compliant Tests |
Throughput, Latency, Frame Loss, Back-to-Back |
| Additional Performance Tests |
Jitter, FrameBERT |
| Frame content |
All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte |
| Frame size |
64, 128, 256, 512, 1024, 1280, 1518, RFC-2544 sweep, Jumbo sweep, or user-defined including baby jumbo sizes up to 2048 |
| Application port |
User defined |
| Rate (bps) |
Up to 1000 M |
| 802.1Q settings |
VLAN Id, priority |
|
| IP TOS settings |
IP Precedence/TOS parameter, DiffServe Code Point |
| Throughput settings |
Duration, maximum rate, measurement accuracy, pass/fail limits |
| Latency settings |
Duration, rate, iterations, pass/fail limits |
| Frame loss settings |
Duration, rate, step size, pass/fail limits |
| Frame loss settings |
Duration, rate, step size, pass fail |
| Back to Back settings |
Min and Max duration, rate, iterations, pass/fail |
| Jitter Settings |
Duration, rate, pass/fail |
| FrameBERT Settings |
Duration, rate, pass/fail |
|
| Server Response Tool |
| TCP Port Response |
DNS Name, IP address, port name, port number, port responsiveness |
| TCP Trace Route |
Hop Count, router name, IP address, average RTT and percentage of total RTT |
|
| Internetwork Throughput Option |
| Compatible remote device |
MetroScope, LinkReflector, OptiView v3 Integrated Network Analyzer, EtherScope, OneTouch Series II |
| Frame content |
All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS) |
| Frame size |
64, 128, 256, 512, 1024, 1280, 1518, sweep of all sizes |
| Rate (bps) |
12336 to 1000 M |
| Duration(s) |
1 to 64,800 (18hr) |
| Results |
Frames sent, received, rate and percent loss for both upstream and downstream directions |
| Results format |
Tabular, graphical, xml-based report |
|
| Traffic generator |
| Traffic type |
Broadcast, multicast or unicast |
| Frame type |
Benign Ethernet, Benign LLC, NetBEUI, Benign IP, IP/ICMP Echo, IP/UDP Echo, IP/UDP Discard, IP/UDP Chargen, IP/UDP NFS, IP/UDP NetBIOS |
| Frame size |
64, 128, 256, 512, 1024, 1280, 1518 |
| Rate |
Utilization (%): >0 – 100, Frames/second: 1 – 1488095 |
| Duration |
Seconds: 1 – continuous, Frames: 1 – continuous |
|
| LinkReflector specifications |
| Weight |
10 oz (311 grams) with batteries installed |
| Dimensions |
5.3” h x 3.1” w x 1.3” d (13.46 cm x 7.87 cm x 3.30 cm) |
| Operating Temperature |
10° to +40°C (50° to 104°F) with up to 95% relative humidity |
| Media Access |
10BASE-T, 100BASE-TX, 1000BASE-T (IEEE 802.3), and PoE (IEEE 802.3af) |
| Operating Modes |
Reflect All, Reflect Targeted MAC, Reflect Targeted IP, Reflect Fluke Networks Test Traffic, Reflect Non-Broadcast, Non-Reflecting (Troubleshooting Mode) |
| Address Setting |
Manual or DHCP |
|
| LinkReflector Troubleshooting Mode |
| Cable Tests |
Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID |
| Tone Generator |
IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz] |
| Ping |
Automatically pings default router and DNS server; can be configured to ping up to 10 additional devices. |
| 802.1x |
Discovers and gains authentication to 802.1x networks. |
| PoE Detection |
Detects and identifies PoE type. |
| Port Verification |
Displays make, model, address, slot, and port of the nearest LLDP device |
| User Interface (UI) |
Display: black and white, 2” x 1” display, link LED; control: five push-buttons for selection of icons and navigation of menus; power: on/off button |
| Ports |
Test ports: RJ45 ports (2): network test port, loop-back wire map port; Application port: mini-USB, Kensington lock receptacle |
| Power Source |
4 AA batteries or optional Li-ion Battery Pack with AC Charger |
|
|
|
|