Datasheet: SimpliFiber Pro Multimode and Singlemode Sources | www.flukenetworks.com

Datasheet: SimpliFiber Pro Multimode and Singlemode Sources

SimpliFiber Pro Multimode and Singlemode Sources

Sturdily built and encased in a durable molding, the next generation SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple. When combined with a SimpliFiber Pro optical power meter, these sources enable you to:

  • Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 850 and 1300 nm or 1310 and 1550 nm wavelengths can be transmitted simultaneously
  • Conveniently save measurements taken at both wavelengths into one record
  • Eliminate time-consuming mistakes with the automatic wavelength detection ability
  • Quickly identify patch panel cable routing without the assistance of a talk set and another technician

*The multimode source is standard in the FTK1000, FTK1300, FTK1375, and FTK1475 kits; the singlemode source is standard in the FTK2000 and FTK1475 kits or available separately as a standalone module.

Multimode source

Singlemode source

Both multimode and singlemode sources are available in the FTK1475 Complete
Verification Kit

Specifications

Multimode Optical Source
Emitter Type LED
Central Wavelength 850 nm, 1300 nm
Wavelength Accuracy 850 nm: +/-30 nm
1300 nm: +/- 20 nm
Spectral Width (FWHM) 850 nm: 50 nm (typical)
1300 nm: 135 nm (typical)
Minimum Output Power 850/1300 nm: ≥ -20 dBm
Power Output Stability1 ±0.1 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled/disabled by user.
Optical Output Connector Fixed SC2
FindFiber Code Generation Yes. Fixed at ID 1.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries.
Battery Life3 40 hrs (typical)
Automatic Power Off 30 minutes (can be disabled by user)
Low Battery Warning Yes, LED blinks
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in
(14.2 cm x 8.1 cm x 4.1cm)
Weight 9.8 oz (278 g)

Specifications (continued)

Singlemode Optical Source
Emitter Type FP Laser: dual 1310 nm/1550 nm
Central Wavelength 1310 nm: +/- 20 nm
1550 nm: +/- 30 nm
Spectral Bandwidth (RMS) 1310 nm: 2 nm (maximum)
1550 nm: 3 nm (maximum)
Minimum Output Power 1310/1550 nm: ≥ -7 dBm (typical)
Power Output Stability1 ±0.25 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.
Optical Connector Fixed SC2
Launch Condition 9/125 μm fiber
FindFiber Code Generation Yes. Fixed at ID 2.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries.
Battery Life3 30 hrs (typical)
Automatic Power Off 30 minutes (can be enabled or disabled by user)
Low Battery Warning LED blinks.
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in
(14.2 cm x 8.1 cm x 4.1cm)
Weight 9.8 oz (278 grams)
1 23° C ± 2° C, after 5 minutes warm-up time
2 LC and ST connectors can be tested using hybrid test-reference cord accessories.
3 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.