TS® 100 Cable Fault Finder

Product Highlights

An easy-to-use cable fault locator, cable and wire manager and tone generator.

Works on any two or more conductor cable up to 3,000 feet (915 meters)
Instantly measures distance to open or any fault from one end of any cable pair
Patented SmartTone^TM tone generator positively identifies pair
Measures cable distance on spool
Measures constantly while 'On' View More >

Displays distance reading rather than waveform
Large bright LED screen
One button operation
High voltage detection
Moisture proof
Additional line cord options available for coaxial cable (F-connectors) and other applications

Read Datasheet

PRODUCT NAVIGATION

Overview

This easy-to-use, competitively priced tester is three tools in one—a cable fault locator, a cable & wire manager and a tone generator with SmartTone™ technology.

From just ONE END of any two or more conductor cable you can measure up to 3,000 feet (915 meters). The TS 100 cable fault locator lets you easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it's perfect for technicians unfamiliar with Time Domain Reflectometery (TDR) fault locator.

Locate and fix cable fault problems without pulling new wire or blindly cutting into walls. Intermittent faults are easier to find because the cable fault locator unit constantly measures while "On".

The TS 100 cable fault locator is perfect for inventory management of cable stock in trucks and warehouses and it can help you generate more accurate bids for jobs by quickly assessing needs and managing the cable stock with greater accuracy.

The TS 100 cable fault locator with patented SmartTone technology gives you 5 distinct tones to use for exact wire and pair identification, even in proximity to current-bearing cable.

When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair.

Voltage detection in the cable fault locator unit will immediately sound an alarm if you accidentally clip onto an energized pair, up to 250VAC.

Features

Models & Accessories

Models

26500390

TS100 Kit with case, BNC to ABN linecord

26500000

TS100 cable fault finder with BNC to alligator clips

26500500

TS100 with BNC to banana to ABN

26500610

TS100 metric cable fault finder with BNC to alligator clips

Accessories

26501160

TS100/TS90 pouch with belt clip

26501200

TS100/TS90 linecord, BNC to F(MALE)

26501700

TS100/TS90 linecord, BNC to banana to ABN

26501600

TS100/TS90 linecord, banana

26501100

TS100/TS90 line cord, BNC to alligator clip

Specifications

General Speciffications

Power

4 AA alkaline batteries, provide 50 hours of operation.

Reverse Battery Protection

No damage to the tester will occur if the batteries are installed backwards.

Input Protection

250 V rms ac, continuous or intermittent

Moisture

If the tester is exposed to water, some may get inside, but it will suffer NO DAMAGE. See the information on moisture under “Maintenance”.

Impedance Range

35 Ω to 330 Ω with auto-compensation within this range. Cables with an impedance outside this range will not be properly tested and may produce erratic or incorrect readings.

Maximum Length

2500 feet on certain cable types, 2000 feet on most cable types, and 500 feet on very lossy cables. The tester will display –Err if the cable is too long to be correctly measured.

Representative Maximum Cable Length

2500 feet: CAT-5 Twisted Pair 2000 feet: 12/2 ac Wire 1000 feet: RG-6/U TV Coax 500 feet: RG-174/U Coax

Minimum Length

No minimum length Minimum non-zero reading is 2 feet

Length Accuracy

±2 feet for cables less than 10 feet ±5 feet for cables longer than 10 feet and shorter than 200 feet ±3 % and ±5 feet for cables longer than 200 feet

High Voltage Detection

An ac voltage of more than 5 V rms will trigger the High Voltage Warning.

Measurement Rate

Maximum of 4 complete measurements per second, decreasing to 2 seconds per measurement based on cable size and uniformity.

VOP

Adjustable from -20- to -99-, retained during power off. Default to -66- when batteries are changed

Measurement Technology

Time Domain Reflectometry (TDR) with 50 Ω drive impedance, 6 V maximum pulse height

Low Battery

Indicator flashes when battery voltage falls below 4.1 V

Tone Injection

Approximately 1 kHz at an amplitude of 80 % of battery voltage. Variable frequency and cadence. Tone characteristic is changed as cable condition changes to “normal-open” from any other condition.

Cable Type

Virtually all two or more conductor cables