OptiFiber® Pro OTDR

Built for the Enterprise

OptiFiber Pro is the first OTDR built from the ground up for enterprise fiber optic cabling testing. OptiFiber Pro is focused on reducing costs while enhancing productivity and improving network reliability.

  • First OTDR with a smartphone user-interface
  • Industry's shortest event and attenuation dead zones
  • Accelerate fiber certification with the fastest set-up and trace times
  • SmartLoop OTDR introduces the testing of two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.
  • Improve resource utilization with custom configurations for projects and users
  • Simplify use with "DataCenter OTDR™" mode and EventMap™ view
  • Custom project folders
  • Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.

See Authorized Rental Partners

Read what customers are saying about OptiFiber® Pro OTDR

Request a Demo Product Configurator
Free Fiber Testing
Best Practices
SmartLoop OTDR video
Talk to an Expert Where to Buy
 

Overview

OptiFiber® Pro is the industry’s first OTDR built from the ground up to meet the challenges of enterprise fiber optic infrastructures. This troubleshooting and certification tool combines uncomplicated power, unparalleled efficiency and the exact functions needed for troubleshooting campus, data center and storage fiber networks.

The OptiFiber® Pro OTDR elevates fiber optic testing with the industry’s only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable testing of fiber patchcords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool.

SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end.

"The Versiv tester has increased our technicians’ productivity in the field allowing for easy setup and faster testing of cables. The ease of which we can download stored test results and leave the tester in the field has also contributed to their productivity. Using the same unit for copper and fiber testing keeps everyone familiar with the setup and testing procedures"
Bill Quinn, Estimator/Project Manager, Telaid
 

Features

Smartphone User Interface

Most OTDRs are designed for a myriad of applications, causing the user interface to be difficult to navigate and interpret. OptiFiber Pro combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.

Advantages:

  • Single-touch tap and swipe control for selecting and scrolling menu items
  • Multi-touch pinch to zoom for easy magnification control on a graphical fiber trace
  • Task-focused design to reduce back and forth navigation through screens
  • Capacitive touchscreen eliminates the need to recalibrate unlike legacy touchscreens
  • Context sensitive on-screen help that gives users additional details or problem resolution suggestions

Optimized for the Datacenter

Driven by server virtualization and multi-gigabit links between servers, networks and storage, the datacenter architecture employs more patch cords and dense topology connectors, rendering carrier-class OTDRs with long dead zones ineffective. OptiFiber Pro not only makes fiber deployment in datacenters possible, but provides the highest level of accuracy for quick problem resolution.

With a simple one-touch selection, users enter DataCenter OTDR mode - without setup time for fine-tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters - end-detection algorithms, pulse widths, etc - without getting confused by the short links or number of connectors.

Advantages:

  • Ultra-short event and attenuation dead-zones precisely locates events and faults on fiber links
  • DataCenter OTDR™ mode automatically sets the configuration to quickly test datacenter fiber
  • The EventMap feature depicts fiber events in a way that requires no trace analysis expertise

SmartLoop OTDR

SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end.

>

Unique Certification with Flexibility and Efficiency

An important aspect in maximizing an OTDR’s value is to properly plan its day-to-day usage. With built-in project management, OptiFiber Pro allows a project manager to define each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certification and reporting.

OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project - defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.

Advantages:

  • Full OTDR capability that certifies fiber performance based on job assignment for each operator
  • Powerful project management facilitates OTDR sharing with clear job assignment for each operator
  • Easy monitoring of job progress with pass/fail results
  • On-screen report generation and upload to LinkWare™ application

FiberInspector™ Pro

OptiFiber Pro incorporates the FiberInspector Pro video inspection system which enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 2-second automated PASS/FAIL certification, per IEC 61300-3-35, eliminates human subjectivity and enables anyone to become a fiber inspection expert. Results can be saved in the certification report alongside OptiFiber Pro's OTDR results.

Other Key Features

Extremely short event and attenuation dead zone
The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area environments.

LinkWare™ management software
Leveraging the popular and multi-featured LinkWare cable test management software application, OptiFiber Pro users can easily access the hassle-free project management, report generation, and software upgrade capabilities to manage workflow and consolidate test results.

Two second trace per wavelength
Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap, Table or Trace. The end result is less time spent testing and more time performing other tasks.

On-screen help – corrective action
On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.

LinkWare™ Live Test Results Management Service
LinkWare Live is a Test Results Management Service from Fluke Networks for cabling professionals managing multiple projects that quickly, easily and affordably provides unmatched job visibility and superior project control from anywhere at any time.

LinkWare Live provides an easy to read dashboard that shows an overview of the project status and a project activity to ensure projects are completed on time. It removes the hurdles in data management by giving the ability to directly upload and consolidate test results from multiple testers. It allows to quickly validate projects and test results in real-time with browser-based ease to avoid any future rework due to incorrect testing or missing test results. Use any smart device with a browser to validate and check projects or test results. LinkWare™ Cable Test Management Software also connects to the LinkWare Live service enabling you to download test results into the LinkWare Cable Test Management Software to generate professional reports in a common format.

    
 

Models & Accessories

 
Models
Model Number/Name Description
OFP-100-M

OptiFiber Pro Multimode OTDR kit. This kit includes the OptiFiber Pro with MM OTDR module, carrying strap, AC adapter/charger, USB interface cable – standard A to micro B, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

OFP-100-M Gold Support:
GLD-OFP-100-M/S1 year of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR kit - Models: OFP-100-M or OFP-100-S
GLD3-OFP-100-M/S3 years of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR kit - Models: OFP-100-M or OFP-100-S
OFP-100-M/GLD
OptiFiber Pro Multimode OTDR kit with 1 year of Gold Support coverage.
OFP-100-MI

OptiFiber Pro Multimode OTDR kit with inspection kit. This kit includes the OptiFiber Pro with MM OTDR module, 2 SC/LC multimode launch cables—50 µm,1 OTDR source port interchangeable LC adapter, USB fiber inspection video probe with 4 tips, 2 launch fiber tool packs, OptiFiber Pro carrying and hand strap, AC adapter/charger, USB interface cable – standard A to micro B, 1 1.25 mm IBC OneClick cleaner, 1 2.5 mm IBC OneClick cleaner, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

OFP-100-MI Gold Support:
GLD-OFP-100-MI/SI1 year of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR with Inspection kit - Models: OFP-100-MI or OFP-100-SI
GLD3-OFP-100-MI/SI3 years of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR with Inspection kit - Models: OFP-100-MI or OFP-100-SI
OFP-100-MI/GLD
OptiFiber Pro Multimode OTDR with inspection kit and 1 year of Gold Support coverage.
OFP-100-S

OptiFiber Pro Singlemode OTDR kit. This kit includes the OptiFiber Pro with SM OTDR module, carrying strap, AC adapter/charger, USB interface cable – standard A to micro B, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

OFP-100-S Gold Support:
GLD-OFP-100-M/S1 year of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR kit - Models: OFP-100-M or OFP-100-S
GLD3-OFP-100-M/S3 years of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR kit - Models: OFP-100-M or OFP-100-S
OFP-100-S/GLD
OptiFiber Pro Singlemode OTDR kit with 1 year of Gold Support coverage.
OFP-100-SI

OptiFiber Pro Singlemode OTDR kit with inspection kit. This kit includes the OptiFiber Pro with SM OTDR module, 2 SC/LC singlemode launch cables—9 µm, OTDR source port interchangeable LC adapter,USB fiber inspection video probe with 4 tips, 2 launch fiber tool packs, OptiFiber Pro carrying and hand strap, AC adapter/charger, USB interface cable – standard A to micro B, 1 1.25 mm IBC OneClick cleaner, 1 2.5 mm IBC OneClick cleaner, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

 

OFP-100-SI Gold Support:
GLD-OFP-100-MI/SI1 year of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR with Inspection kit - Models: OFP-100-MI or OFP-100-SI
GLD3-OFP-100-MI/SI3 years of Gold Support for OptiFiber Pro Multimode or Singlemode OTDR with Inspection kit - Models: OFP-100-MI or OFP-100-SI
OFP-100-SI/GLD
OptiFiber Pro Singlemode OTDR with inspection kit and 1 year of Gold Support coverage.
OFP-100-Q

OptiFiber Pro Quad OTDR kit. This kit includes the OptiFiber Pro with Quad OTDR module, carrying strap, AC adapter/charger, USB interface cable – standard A to micro B, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

OFP-100-Q Gold Support:
GLD-OFP-100-Q1 year of Gold Support for for OptiFiber Pro Quad OTDR
GLD3-OFP-100-Q3 years of Gold Support for OptiFiber Pro Quad OTDR
OFP-100-Q/GLD
OptiFiber Pro Quad OTDR kit with 1 year of Gold Support coverage.
OFP-100-QI

OptiFiber Pro Quad OTDR kit with inspection kit. This kit includes the OptiFiber Pro with Quad OTDR module, 2 SC/LC multimode launch cables—50 µm, 2 SC/LC singlemode launch cable—9 µm, 2 OTDR source port interchangeable LC adapter, USB fiber inspection video probe with 4 tips, 2 launch fiber tool packs, OptiFiber Pro carrying and hand strap, AC adapter/charger, USB interface cable – standard A to micro B, 1 1.25 mm IBC OneClick cleaner, 1 2.5 mm IBC OneClick cleaner, user guide CD, LinkWare software CD, Getting Started Guide, statement of calibration, registration card, factory-based warranty and carrying case. See Photo

OFP-100-QI Gold Support:
GLD-OFP-100-QI1 year of Gold Support for OptiFiber Pro Quad OTDR with Inspection Kit
GLD3-OFP-100-QI3 years of Gold Support for OptiFiber Pro Quad OTDR with Inspection Kit
OFP-100-QI/GLD
OptiFiber Pro Quad OTDR with inspection kit and 1 year of Gold Support coverage.
OFP-CFP-MI

OptiFiber Pro Multimode OTDR and CertiFiber Pro Multimode kit with inspection kit. This kit includes (1) Versiv Mainframe & Remote, (1) OptiFiber Pro Multimode OTDR module, (2) CertiFiber Pro MultiMode OLTS modules, (2) HandStraps, (2) Shoulder Straps, (2) Carry Cases, USB Interface Cable, LinkWare Software CD, User Manual CD, (2) AC Chargers, (2) OneClick Cleaner (1.25/2.50 mm), (2) SC/LC Multimode Launch Cables—50 µm, 1 OTDR source port interchangeable LC adapter, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) LC/LC Simplex Adaptor, SC/LC EF-compliant MM TRC Kit 50 µm, TRC Carry Case, TPAK Fiber Hanging Kit, Statement of Calibration and Getting Started Guides. See Photo

OFP-CFP-MI Gold Support:
GLD-OFP-CFP-MI/SI1 year of Gold Support coverage for OFP-CFP-MI or OFP-CFP-SI which includes OptiFiber Pro and CertiFiber Pro Multimode Kit OR Singlemode with Inspection.
GLD3-OFP-CFP-MI/SI3 years of Gold Support coverage for OFP-CFP-MI or OFP-CFP-SI which includes OptiFiber Pro and CertiFiber Pro Multimode Kit OR Singlemode Kit with Inspection.
OFP-CFP-SI

OptiFiber Pro Singlemode OTDR and CertiFiber Pro Singlemode kit with inspection kit. This kit includes (1) Versiv Mainframe & Remote, (1) OptiFiber Pro Singlemode OTDR module, (2) CertiFiber Pro SingleMode OLTS modules, (2) HandStraps, (2) Shoulder Straps, (2) Carry Cases, USB Interface Cable, LinkWare Software CD, User Manual CD, (2) AC Chargers, (2) OneClick Cleaner (1.25/2.50 mm), (2) SC/LC Singlemode Launch Cables—9 µm, (1) OTDR source port interchangeable LC adapter, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) LC/LC Simplex Adaptor, SC/LC EF-compliant MM TRC Kit 50 µm, TRC Carry Case, TPAK Fiber Hanging Kit, Statement of Calibration and Getting Started Guides. See Photo

OFP-CFP-SI Gold Support:
GLD-OFP-CFP-MI/SI1 year of Gold Support coverage for OFP-CFP-MI or OFP-CFP-SI which includes OptiFiber Pro and CertiFiber Pro Multimode Kit OR Singlemode with Inspection.
GLD3-OFP-CFP-MI/SI3 years of Gold Support coverage for OFP-CFP-MI or OFP-CFP-SI which includes OptiFiber Pro and CertiFiber Pro Multimode Kit OR Singlemode Kit with Inspection.
OFP-CFP-QI

OptiFiber Pro Quad OTDR and CertiFiber Pro Quad kit with inspection kit. This kit includes (1) Versiv Mainframe & Remote, (1) OptiFiber Pro Quad OTDR module, (2) CertiFiber Pro Quad OLTS modules, (2) HandStraps, (2) Shoulder Straps, (2) Carry Cases, USB Interface Cable, LinkWare Software CD, User Manual CD, (2) AC Chargers, (2) OneClick Cleaner (1.25/2.50 mm), (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cables—9 µm, (2) OTDR source port interchangeable LC adapters, USB Fiber Inspection Video Probe with 4 Tips, SC/SC Simplex Adaptor, (2) LC/LC Simplex Adaptor, SC/LC EF-compliant MM TRC Kit 50 µm, TRC Carry Case, TPAK Fiber Hanging Kit, Statement of Calibration and Getting Started Guides. See Photo

OFP-CFP-QI Gold Support:
GLD-OFP-CFP-QI1 year of Gold Support coverage for OFP-CFP-QI which includes OptiFiber Pro and CertiFiber Pro Quad Kit with Inspection
GLD3-OFP-CFP-QI

3 years of Gold Support coverage for OFP-CFP-QI which includes OptiFiber Pro and CertiFiber Pro Quad Kit with Inspection.

OFPMI-MFP
Data Center Fiber (MM) Troubleshooting Kit - includes the OFP-100-MI, MFTK1200 and FI1000-MPO-UTIP
OFPMI-MFP Gold Support:
GLD-OFPMI-MFP1 year of Gold Support coverage for OFPMI-MFP which includes the OFP-100-MI, MFTK1200 and FI1000-MPO-UTIP
GLD3-OFPMI-MFP3 years of Gold Support coverage for OFPMI-MFP which includes the OFP-100-MI, MFTK1200 and FI1000-MPO-UTIP
OFPQI-MFP
Data Center Fiber (MM/SM) Troubleshooting Kit - includes the OFP-100-QI, MFTK1200 and FI1000-MPO-UTIP
OFPQI-MFP Gold Support:
GLD-OFPQI-MFP1 year of Gold Support coverage for OFPQI-MFP which includes the OFP-100-QI, MFTK1200 and FI1000-MPO-UTIP
GLD3-OFPQI-MFP3 years of Gold Support coverage for OFPQI-MFP which includes the OFP-100-QI, MFTK1200 and FI1000-MPO-UTIP
1T-3000-OFP-QUAD

OneTouch AT 1T-3000, plus an OptiFiber Pro Quad OTDR module, four launch cables ((2) 50μm SC/LC, (2) 9μm SC/LC), two IBC OneClick cleaners (1.25mm, 2.5mm), and carrying cases. See Photo

1T-3000-OFP-QUAD Gold Support:
GLD-1T30001 year of Gold Support for the 1T-3000 OneTouch AT Network Assistant
GLD-OFP-MOD-Q1 year of Gold Support coverage for OptiFiber Pro Quad Module
OFP-Q-ADD

OptiFiber Pro Add on Kit - includes OptiFiber Pro Quad OTDR Module, (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cable—9 µm, (2) OTDR source port interchangeable LC adapters, SC/SC Simplex Adaptor, LC/LC Simplex Adaptor, TPAK Fiber Hanging Kit, Carry Case, Statement of Calibration and Getting Started Guide.See Photo

OFP-Q-ADD Gold Support:
GLD-OFP-Q-ADD1 year of Gold Support coverage for OFP-Q-ADD which includes OptiFiber Pro Quad OTDR module and SC/LC launch cords
GLD3-OFP-Q-ADD3 years of Gold Support coverage for OFP-Q-ADD which includes OptiFiber Pro Quad OTDR module and SC/LC launch cords
CFP-Q-ADD

CertiFiber Pro Add on Kit – includes (2) CertiFiber Pro Quad OLTS Modules, SC/LC EF-compliant MM TRC Kit 50 µm, SC/LC SM TRC Kit, TRC Carrying Case, (2) LC/LC Simplex Adaptors, Large Carry Case, User Manual CD, Statement of Calibration and Getting Started Guide.See Photo

CFP-Q-ADD Gold Support:
GLD-CFP-Q-ADD1 year of Gold Support coverage for CFP-Q-ADD which includes CertiFiber Pro Quad OLTS module and SC/LC TRCs
GLD3-CFP-Q-ADD3 years of Gold Support coverage for CFP-Q-ADD which includes CertiFiber Pro Quad OLTS module and SC/LC TRCs
CFP-Q-ADD-R

CertiFiber Pro Add on Kit with Remote – includes 1 Versiv Remote, (2) CertiFiber Pro Quad OLTS modules, SC/LC EF-compliant MM TRC Kit 50 µm, SC/LC SM TRC Kit, TRC Carrying Case, (2) LC/LC Simplex Adaptors, (2) HandStraps, (2) Shoulder Straps, Large Carry Case, User Manual CD, AC Chargers, Statement of Calibration and Getting Started Guide See Photo

CFP-Q-ADD-R Gold Support:
GLD-CFP-Q-ADD-R1 year of Gold Support coverage for CFP-Q-ADD-R which includes CertiFiber Pro Quad OLTS module and Versiv Remote
GLD3-CFP-Q-ADD-R3 years of Gold Support coverage for CFP-Q-ADD-R which includes CertiFiber Pro Quad OLTS module and Versiv Remote
OFP-MM

OptiFiber Pro Multimode OTDR module. See Photo

OFP-MM Gold Support:
GLD-OFP-MOD-M/S1 year of Gold Support coverage for OptiFiber Pro Multimode or Singlemode module - Models: OFP-MM or OFP-SM
GLD3-OFP-MOD-M/S3 years of Gold Support coverage for OptiFiber Pro Multimode or Singlemode module - Models: OFP-MM or OFP-SM
OFP-SM

OptiFiber Pro Singlemode Quad OTDR module  See Photo

OFP-SM Gold Support:
GLD-OFP-MOD-M/S1 year of Gold Support coverage for OptiFiber Pro Multimode or Singlemode module - Models: OFP-MM or OFP-SM
GLD3-OFP-MOD-M/S3 years of Gold Support coverage for OptiFiber Pro Multimode or Singlemode module - Models: OFP-MM or OFP-SM
OFP-QUAD

OptiFiber Pro Quad OTDR module See Photo

OFP-QUAD Gold Support:
GLD-OFP-MOD-Q1 year of Gold Support coverage for OptiFiber Pro Quad Module
GLD3-OFP-MOD-Q3 years of Gold Support coverage for OptiFiber Pro Quad Module
FI-1000-KIT

A USB Fiber Inspection Video probe for Versiv products plus tip set (LC, FC/SC bulkhead, 1.25 and 2.5mm universal tips in a box). See Photo

FI-1000-KIT Gold Support:
GLD-FI1 year Gold Support coverage for FI-1000 and FI-1000-Kit
GLD3-FI3 years of Gold Support coverage for FI-1000 and FI-1000-Kit
VERSIV-M
Versiv Main Replacement
VERSIV-M Gold Support:
GLD-TFS1 year of Gold Support coverage for the TFS mainframe with battery - Model: TFS
 
Accessories
Model Number/Name Description
MMC-50-SCSC
Multimode launch cable 50 µm SC/SC See Photo
MMC-50-SCLC
Multimode launch cable 50 µm SC/LC See Photo
MMC-50-LCLC
MULTIMODE LAUNCH CABLE 50µm LC/LC See Photo
MMC-50-SCST
Multimode launch cable 50 µm SC/ST See Photo
MMC-50-STST
MULTIMODE LAUNCH CABLE 50µm ST/ST See Photo
MMC-50-SCFC
Multimode launch cable 50 µm SC/FC See Photo
MMC-50-FCFC
MULTIMODE LAUNCH CABLE 50µm FC/FC See Photo
MMC-50-SCE2K
Multimode launch cable 50 µm SC/E2K See Photo
MMC-62-SCSC
Multimode launch cable 62.5 µm SC/SC See Photo
MMC-62-SCLC
Multimode launch cable 62.5 µm SC/LC See Photo
MMC-62.5-LCLC
MULTIMODE LAUNCH CABLE 62.5µm LC/LC See Photo
MMC-62-SCST
Multimode launch cable 62.5 µm SC/ST See Photo
MMC-62.5-STST
MULTIMODE LAUNCH CABLE 62.5µm ST/ST See Photo
MMC-62-SCFC
Multimode launch cable 62.5 µm SC/FC See Photo
MMC-62.5-FCFC
MULTIMODE LAUNCH CABLE 62.5µm FC/FC See Photo
SMC-9-SCSC
Singlemode launch cable 9 µm SC/SC See Photo
SMC-9-SCLC
Singlemode launch cable 9 µm SC/LC See Photo
SMC-9-LCLC
SINGLEMODE LAUNCH CABLE 9µm LC/LC See Photo
SMC-9-SCST
Singlemode launch cable 9 µm SC/ST See Photo
SMC-9-STST
SINGLEMODE LAUNCH CABLE 9 µm ST/ST See Photo
SMC-9-SCFC
Singlemode launch cable 9 µm SC/FC See Photo
SMC-9-FCFC
SINGLEMODE LAUNCH CABLE 9 µm FC/FC See Photo
SMC-9-SCE2KAPC
Singlemode launch cable 9 µm SC/E2000 APC See Photo
SMC-9-SCSCAPC
Singlemode launch cable 9 µm SC/SCAPC See Photo
SMC-9-SCFCAPC
Singlemode launch cable 9 µm SC/FCAPC See Photo
SMC-9-SCLCAPC
Singlemode launch cable 9 µm SC/LCAPC See Photo
MRC-50-SCSC-0.3m
MM 50 µm TRC 0.3m for OTDR port (SC/SC)
MRC-62.5-SCSC-0.3m
MM 62.5µm TRC 0.3m for OTDR port (SC/SC)
SRC-9-SCSC-0.3m
SM 9µm TRC 0.3M for OTDR port (SC/SC)
MRC-50-LCLC-0.3m
MM 50µm TRC 0.3m for OTDR port (LC/LC)
MRC-62.5-LCLC-0.3m
MM 62.5µm TRC 0.3m for OTDR port (LC/LC)
SRC-9-LCLC-0.3m
SM 9µm TRC 0.3M for OTDR port (LC/LC)
ADP-DuplexSC
SC-SC duplex adapter
ADP-DuplexLC
LC-LC duplex adapter
PA-SC
OTDR source port interchangeable SC adapter
PA-LC
OTDR source port interchangeable LC adapter
PA-ST
OTDR source port interchangeable ST adapter
PA-FC
OTDR source port interchangeable FC adapter
FI-1000
FI-1000 USB video probe for Versiv products
FI-1000 Gold Support:
GLD-FI1 year of Gold Support coverage for FI-1000 USB Fiber Inspection Video Probe and video probe tips - - Model: OFP-FI and FI-1000
GLD3-FI3 years of Gold Support coverage for FI-1000 and FI-1000-Kit
FI1000-SCFC-TIP
SC and FC bulkhead video probe tip
FI1000-LC-TIP
LC bulkhead video probe tip
FI1000-ST-TIP
ST bulkhead video probe tip
FI1000-MU-TIP
MU bulkhead video probe tip
FI1000-E2KAPC-TIP
E2000/APC bulkhead video probe tip
FI1000-SCAPC-TIP
SC/APC bulkhead video probe tip
FI1000-E2K-TIP
E2000 bulkhead video probe tip
FI1000-LCAPC-TIP
LC/APC bulkhead video probe tip
FI1000-2.5-UTIP
2.5 mm universal video probe tip for patch cords
FI1000-1.25-UTIP
1.25 mm universal video probe tip for patch cords
FI1000-2.5APC-UTIP
2.5 mm APC universal video probe tip for patch cord
FI1000-MPO-UTIP
MPO probe tip and translator knob for patch cords and bulkheads
FI1000-MPOAPC-UTIP
MPO/APC probe tip and translator knob for patch cords and bulkheads
FI1000-1.25APC-TIP
1.25 mm APC universal video probe tip for patch cords
FI1000-MPOAPC-RT
MPO/MTP APC replacement tip with no translator knob
FI1000-MPO-RT
MPO/MTP replacement tip with no translator knob
FI-1000-KIT
FI-1000 USB video probe and tip set (LC,FC/SC bulkhead, 1.25 AND 2.5 mm universal tips in a box)
NFC-Kit-Case-E

Enhanced Fiber Optic Cleaning Kit - Includes an IBC OneClick 1.25mm cleaner, an IBC OneClick 2.5mm cleaner, an IBC OneClick MPO cleaner, a solvent pen, a cleaning cube and a softcase See Photo

VERSIV-M
Versiv Main Replacement
VERSIV-RU
Versiv Remote Replacement
VERSIV-CASE3

VERSIV Hardsided Case See Photo

VERSIV-TSET

Versiv Headphones See Photo

VERSIV-BATTERY

Versiv Battery See Photo

VERSIV-ACUN

Versiv Charger See Photo

VERSIV-STRP

Versiv Strap Kit See Photo

VERSIV-STND
Versiv Demo Stand
VERSIV-LG-CASE

Versiv Large Carry Case See Photo

VERSIV-SM-CASE

Versiv Small Carry Case. See Photo

VERSIV-BACKPK-STRP

Backpack strap for Versiv Large Case See Photo

TFS-USB-CBL
USB interface cable standard A to micro B
 

Specifications

Key OTDR specifications

 Multimode moduleSinglemode moduleQuad module
Wavelengths850 nm +/- 10 nm
1300 nm +35/-15 nm
1310 nm +/- 25 nm
1550 nm +/- 30 nm
850 nm +/- 10 nm
1300 nm +35/-15 nm
1310 nm +/- 25 nm
1550 nm +/- 30 nm
Compatible fiber types 50/125 µm
62.5/125 µm
Singlemode50/125 µm
62.5/125 µm
Singlemode
Event dead zone 1850 nm: 0.5 m typical
1300 nm: 0.7 m typical
1310 nm: 0.6 m typical
1550 nm: 0.6 m typical
850 nm: 0.5 m typical
1300 nm: 0.7 m typical
1310 nm: 0.6 m typical
1550 nm: 0.6 m typical
Attenuation dead zone 2 850 nm: 2.5 m typical
1300 nm: 4.5 m typical
1310 nm: 3.6 m typical
1550 nm: 3.7 m typical
850 nm: 2.5 m typical
1300 nm: 4.5 m typical
1310 nm: 3.6 m typical
1550 nm: 3.7 m typical
Dynamic range 3, 5, 6850 nm: 28 dB typical
1300 nm: 30 dB typical
1310 nm: 32 dB typical
1550 nm: 30 dB typical
850 nm: 28 dB typical
1300 nm: 30 dB typical
1310 nm: 32 dB typical
1550 nm: 30 dB typical
Max distance range setting40 km130 kmMM: 40 km
SM: 130 km
Distance measurement range 4, 5, 7, 8, 9, 10850 nm: 9 km
1300 nm: 35 km
1310 nm: 80 km
1550 nm: 130 km
850 nm: 9 km
1300 nm: 35 km
1310 nm: 80 km
1550 nm: 130 km
Reflectance range 4, 5850 nm: -14 dB to -57 dB (typical)
1300 nm: -14 dB to -62 dB (typical)
1310 nm: -14 dB to -65 dB (typical)
1550 nm: -14 dB to -65 dB (typical)
850 nm: -14 dB to -57 dB (typical)
1300 nm: -14 dB to -62 dB (typical)
1310 nm: -14 dB to -65dB (typical)
1550 nm: -14 dB to -65 dB (typical)
Sample resolution3 cm to 400 cm3 cm to 400 cm3 cm to 400 cm
Pulse widths (nominal) 850 nm: 3, 5, 20, 40, 200 ns
1300 nm: 3, 5, 20, 40, 200, 1000 ns
1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns850 nm: 3, 5, 20, 40, 200 ns
1300 nm: 3, 5, 20, 40, 200, 1000 ns
1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns
Test time (per wavelength)Auto setting: 5 sec (typical)Auto setting: 10 sec (typical)Auto setting:
MM – 5 sec (typical)
SM – 10 sec (typical)
Quick test setting:
2 sec (typical)
Quick test setting:
5 sec (typical)
Quick test setting:
MM – 2 sec (typical)
SM – 5 sec (typical)
Best resolution setting:
2 to 180 sec
Best resolution setting:
5 to 180 sec
Best resolution setting:
MM – 2 to 180 sec M
SM – 5 to 180 sec
FaultMap setting:
2 sec (typical), 180 sec (max)
FaultMap setting:
10 sec (typical), 180 sec (max)
FaultMap setting:
MM - 2 sec (typical), MM - 180 sec (max)
SM - 10 sec (typical), SM - 180 sec (max)
DataCenter OTDR setting:
1 sec (typical at 850 nm), 7 sec (max)
DataCenter OTDR setting:
20 sec (typical), 40 sec (max)
DataCenter OTDR setting:
MM – 1 sec (typical at 850 nm) MM – 7 sec (max)
SM – 20 sec (typical) SM – 40 sec (max)
Manual setting:
3, 5, 10, 20, 40, 60, 90, 120, 180 sec
Manual setting:
3, 5, 10, 20, 40, 60, 90, 120, 180 sec
Manual setting:
-3, 5, 10, 20, 40, 60, 90, 120, 180 sec SM - 3, 5, 10, 20, 40, 60, 90, 120, 180 sec

 

  1. Measured at 1.5 dB below non-saturating reflection peak with the shortest pulse width. Reflection peak < -40 dB for multimode and < - 50 dB for singlemode.
  2. Measured at +/- 0.5 dB deviation from backscatter with the shortest pulse width. Reflection peak < -40 dB for multimode and < - 50 dB for singlemode.
  3. For typical backscatter coefficient for OM1 fiber: 850: -65 dB, 1300: -72 dB.
  4. Typical backscatter and attenuation coefficients for OM2-OM4 fiber: 850 nm: -68 dB; 2.3 dB/km: 1300 nm: -76 dB; 0.6 dB/km.
  5. Typical backscatter and attenuation coefficients for OS1-OS2 fiber: 1310nm : -79 dB; 0.32 dB/km; 1550 nm: -82 dB; 0.19 dB/km.
  6. SNR=1 method, 3 minute averaging, widest pulse width.
  7. 850 = 9 km typical to find the end or 7 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
  8. 1300 = 35 km typical to find the end or 30 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
  9. 1310 = 80 km typical to find the end or 60km typical to find a 0.1 dB event (with a maximum of 20 dB attenuation prior to the event).
  10. 1550 = 130 km typical to find the end or 90 km typical to find a 0.1 dB event (with a maximum of 18 dB attenuation prior to the event).
  11. Does not include index of refraction error and does not include automatic event location error.
  12. dB variation per 1 dB step.
  13. Applies along the trace backscatter within the distance range in which the OTDR can find a 0.1 dB event.

 

Additional key specifications

FiberInspector probe specification
Magnification~ 200X with OptiFiber Pro Display
Light sourceBlue LED
Power sourceVersiv mainframe
Field of View (FOV)Horizontal: 425 µm
Vertical: 320 µm
Minimum detectable particle size0.5 µm
DimensionsApproximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip
Weight200 g
Temperature rangeOperating: 32°F to 122°F (0 °C to +50 °C)
Storage: -4°F to +158°F (-20°C to +70°C)
CertificationsCE (when used with the mainframe)
VFL specifications
On/Off controlMechanical switch and a button on the touch screen
Output power316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm)
Operating wavelength650 nm nominal
Spectral width (RMS)±3 nm
Output modesContinuous wave Pulsed mode (2 Hz to 3 Hz blink frequency)
Connector adapter2.5 mm universal
Laser safety (classification)Class II CDRH Complies to EN 60825-2
General specifications
WeightMainframe with module and battery: 3 lbs, 5 oz (1.28 kg)
DimensionsMainframe with module and battery: 2.625 in x 5.25 in x 11.0 in ( 6.67 cm x 13.33 cm x 27.94 cm)
BatteryLithium ion battery pack, 7.2 volts
Battery lifeEight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber
Charge Time 
Tester OffFour hours to charge from 10% to 90% capacity
Tester OnSix hours to charge from 10% to 90% capacity with the tester on
Environmental specifications
Operating temperature*-18ºC to 45ºC
Non-operating temperature-30ºC to 60ºC
Operating altitude4,000 m (13123 ft)
3200 m (10,500 ft) with ac adapter
Storage altitude12,000 m
EMCEN 61326-1

* Using battery power. With AC power: 0ºC to 45ºC. Real Time Trace function used for no more than 5 minutes in a 15-minute period. Maximum ambient temperature is 35ºC for continuous use of the Real Time Trace function.
* Do not keep battery at temperatures below -20°C (-4°F) or above 50°C (122°F) for periods longer than one week to maintain battery capacity.

 

Documents

 

Brochures

Title/Description Download  
Versiv Installation Contractor Brochure
Download PDF
1.89 MB
 

Data Sheets

Title/Description Download  
LinkWare Data Sheet
Download PDF
OptiFiber Pro OTDR Datasheet
Download PDF
 

Catalogs

Title/Description Download  
Fluke Networks´ Solution Catalog NEW
68 page guide to selection and ordering Fluke Networks´ Solutions and Products
Download PDF
7.32 MB
 

Application Notes

Title/Description Download  
Application Note: Why Calibrate Your Cable Certifier?
Download PDF
Copper Certification Testing Best Practices Pocket Guide
Download PDF
7.2 MB
Fiber Testing Best Practices - Pocket Guide
Download PDF
1.84 MB
 

White Papers

Title/Description Download  
Choosing The Right OTDR White Paper
Download PDF
1.69 MB
Encircled Flux- Real Or Imaginary
Download PDF
1.29 MB
Executing Highly Accurate Fiber Measurements in a Fraction of the Time
Download PDF
The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need for Encircled Flux
Download PDF
Whitepaper: Cabling Certification State of Industry
Download PDF
382.91 KB
Whitepaper: How To Find Profits In New Places
Download PDF
 

Flyers

Title/Description Download  
Optifiber Pro Gold Benefits/value Flyer - US Priced
Download PDF
1.32 MB
 

Training

Certified Test Technician Training Course

You need to train and certify your existing employees to stay competitive in the installation and certification of high-speed structured cabling systems. Investing in the Fluke Networks Certified Cabling Test Technician™ (CCTT) training and certification program will not only improve installer skills, but also their effectiveness and productivity on the job in testing, certifying and troubleshooting copper and fiber cabling systems.

 

Click here for more information on the CCTT program.

 

 

OptiFiber® Pro OTDR “Getting Started” Training Videos

New to the OptiFiber® Pro OTDR?
Learn the basics of operation, including unboxing, set-up, testing and reporting with our free video training courses.

 

Click here to access.

 

 

Gold Product Support

Gold Support for your OptiFiber Pro OTDR allows you to make the most of your purchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.

What do you get with Gold Support for your OptiFiber Pro OTDR and fiber module(s)?

Annual Calibration and Factory Refresh - ISO 9001 standards compliance requires annual unit calibration. Keeping your Fiber modules calibrated is critical to ensure accuracy when testing fiber networks. Our calibration processes are ISO-9001 controlled and designed to certify that your OptiFiber Pro OTDR and fiber module(s) meet all published specifications. When you schedule calibration for your OptiFiber Pro OTDR and covered fiber module(s) we will set you up to receive a loaner* unit while your OptiFiber Pro OTDR and covered fiber module(s) are precisely calibrated to factory specifications (calibration certificate provide - calibration traceable with data available for extra charge), repaired as necessary with genuine OEM repair parts, upgraded with all of the latest software and firmware then cleaned and performance verified. In addition, all accessories that came with your OptiFiber Pro OTDR  will be tested and replaced if faulty or defective. *Loaner unit for calibration is currently only available in the U.S., and must be scheduled.

Repairs and loaner equipment - If your OptiFiber Pro OTDR should fail, we'll deliver a loaner unit via next business day delivery to keep you up and running.  We'll repair your OptiFiber Pro OTDR and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.

Gold Lifetime BuyBack Guarantee - Buy the tools you need now knowing that Fluke Networks will buy it back when it’s time for a new one.  Get 100% cash back within 30 days, 60% within 1 year, and 15% after a year for the life of your tester covered by Gold. (Full terms and conditions can be found at www.flukenetworks.com/GoldBuyBack.) (Currently not available within Asia)

Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of yourOptiFiber Pro OTDR and understand the results you are seeing.

Accessory Replacement - Some accessories are essential to your OptiFiber Pro OTDR . The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.

Software upgrades - Your OptiFiber Pro OTDR will never be out of date. You'll receive all software upgrades free.

Member Only promotions - Your membership qualifies you for Members Only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.

Ensure that you are getting the most out of your OptiFiber Pro OTDR  with Gold Support Services.