Models & Accessories
NORDX GIGABIX (T568A) Personality Module
NORDX GIGABIX (T568B) Personality Module
Headset for DSP and DTX Cable Analyzers
30W Power Supply, 15V, 2A with US adapter. See Photo
30W Power Supply, 15V, 2A with US, EU, AU, and UK adapters See Photo
30W Power Supply, 15V, 2A with US, South Africa and India adapters See Photo
EU, AU, UK adapters for 30W power supply. See Photo
South Africa and India adapters for 30W power supply See Photo
Standard Carrying Case-DTX Series
DTX carrying strap
USB Interface Cable (Mini-B)
Serial RS-232 Cable (DB-9 to IEEE 1394)
Lithium Ion Battery Pack
|Copper Adapters and Accessories|
DTX Coax Cable Test Adapter (2 adapters included)
DTX Patch Cord Test Adapter Set for Category 5e patch cords. Certifies both shielded and unshielded category 5e patch cords per ANSI/TIA 568-C and ISO 11801:2010.
DTX Patch Cord Test Adapter Set for Category 6 patch cords. Certifies both shielded and unshielded category 6 patch cords per ANSI/TIA 568-C and ISO 11801:2010.
DTX Patch Cord Test Adapter Set for Category 6A patch cords. Certifies both shielded and unshielded category 6A patch cords per ISO 11801:2010.
Twin pack of shielded Cat 5e jacks. Recommended replacement for DTX-PC5ES Patch Cord Test adapters
Twin pack of shielded Cat 6 jacks. Recommended replacement for DTX-PC6S Patch Cord Test adapters.
Twin pack of shielded Cat 6A jacks. Recommended replacement for DTX-PC6AS Patch Cord Test adapters.
Replacement Cat 6 Jacks for the DSP-PCI-C6 Patch Cord Adapter, set of 10
Set of 2 Permanent Link Adapters for Cat6A and Alien Crosstalk testing. This adapter can be used for all permanent link tests Cat6A/6/5e/5 and Cat 3.
One Permanent Link Adapter for Cat 6A and Alien Cross Talk testing. This adapter can be used for all permanent link tests Cat 6A /6/5e/5 and Cat 3.
DTX-PLA002 plug replacement parts. This item includes two contact blocks of the 8-pin modular plug.
Set of 2 Permanent Link Adapters. This adapter is compatible with all DSP-PMxx Personality Modules. (Available in US, CA, and APAC)
One Permanent Link Adapter for use with the DTX Series CableAnalyzer. This adapter is compatible with all DSP-PMxx Personality Modules but it does not include a Personality Module. (Available in US, CA, and APAC)
Set of two Cat 6A/Class Ea Channel Adapters optimized for Alien Crosstalk measurements. These adapters can be used to test Cat 6A/ 6/ 5e/ 5/ 3 and Class Ea/E/D and C channels.
Cat 6A/Class Ea Channel Adapter optimized for Alien Crosstalk measurements. This adapter can be used to test Cat 6A/6/ 5e/ 5/3 and Class Ea/E/D and C channels.
|Fiber Modules and Accessories|
SC/SC LAUNCH FIBER 50 µm See Photo
SC/LC LAUNCH FIBER 50 µm See Photo
MULTIMODE LAUNCH CABLE 50µm LC/LC See Photo
SC/ST LAUNCH FIBER 50 µm See Photo
MULTIMODE LAUNCH CABLE 50 µm ST/ST See Photo
SC/FC LAUNCH FIBER 50 µm See Photo
MULTIMODE LAUNCH CABLE 50µm FC/FC See Photo
SC/E2000 LAUNCH FIBER 50 µm See Photo
SC/SC LAUNCH FIBER 62 µm See Photo
SC/LC LAUNCH FIBER 62.5 µm See Photo
MULTIMODE LAUNCH CABLE 62.5µm LC/LC See Photo
SC/ST LAUNCH FIBER 62.5 µm See Photo
MULTIMODE LAUNCH CABLE 62.5µm ST/ST See Photo
SC/FC LAUNCH FIBER 62.5 µm See Photo
MULTIMODE LAUNCH CABLE 62.5µm FC/FC See Photo
SC/SC LAUNCH FIBER SM See Photo
SC/LC LAUNCH FIBER SM See Photo
SINGLEMODE LAUNCH CABLE 9µm LC/LC See Photo
SC/ST LAUNCH FIBER SM See Photo
SINGLEMODE LAUNCH CABLE 9 µm ST/ST See Photo
SC/FC LAUNCH FIBER SM See Photo
SINGLEMODE LAUNCH CABLE 9 µm FC/FC See Photo
SC/E2000 LAUNCH FIBER SM See Photo
Singlemode launch cable 9 µm SC/SCAPC See Photo
Singlemode launch cable 9 µm SC/FCAPC See Photo
Singlemode launch cable 9 µm SC/LCAPC See Photo
Set of two SC Adapters for DTX-xFM2 power meter port.
Set of two LC Adapters for DTX-xFM2 power meter port.
Set of two ST Adapters for DTX-xFM2 power meter port.
FC Test Adapters, Set of two
A kit containing the Test Reference Cords sets NFK1-DPLX-LC, NFK1-DPLX-ST, NFK2-DPLX-LC, NFK2-DPLX-ST, LC and ST adapters for the power meter and 62.5/125 and 50/125
Duplex MM 62.5µm TRC for SC Adapter
Duplex MM 62.5µm TRC for LC Adapter
Duplex MM 62.5µm TRC for ST Adapter
Duplex MM 62.5µm TRC for FC Adapter
Duplex MM 50µm TRC for SC Adapter
Duplex MM 50µm TRC for LC Adapter
Duplex MM 50µm TRC for ST Adapter
Duplex MM 50µm TRC for FC Adapter
Duplex SM 9µm TRC for SC Adapter
Duplex SM 9µm TRC for LC Adapter
Duplex SM 9µm TRC for ST Adapter
Duplex SM 9µm TRC for FC Adapter
LC Accessory Kit, 62.5
Multimode Fiber Mandrel kit containing two red mandrels for 50/125 µm cable and two gray mandrels for 62.5/125 µm cable
Multimode Fiber Mandrel for 50/125
Multimode Fiber Mandrel for 62.5/125
Fiber Optic Cleaning Kit.
Fiber Accessories Carrying Case
Carry case for DTX-xFM or DTX-xFM2 Fiber Loss Test Modules with storage space for Test Reference Cords and fiber connector adapters
SYSTIMAX® VisiPatch® 360 (T568B) Personality Module
SYSTIMAX® VisiPatch® 360 (T568A) Personality Module
TYCO/AMP 610XC CONNECTOR (T568B) Personality Module
TYCO/AMP 610XC CONNECTOR (T568A) Personality Module
LEVITON 110 (T568B) Personality Module
LEVITON 110 (T568A) Personality Module
ADC/KRONE HIGHBAND (T568B) Personality Module
ADC/KRONE HIGHBAND (T568A) Personality Module
ADC/KRONE ULTIM8 (T568B) Personality Module
ADC/KRONE ULTIM8 (T568A) Personality Module
SIEMON S210 (T568B) Personality Module
SIEMON S210 (T568A) Personality Module
PANDUIT GIGAPUNCH (T568B) Personality Module
Gerard Industries CP GigaPro (T568B) Personality Module
Gerard Industries CP GigaPro (T568A) Personality Module
SYSTIMAX® 110 (T568B) Personality Module
SYSTIMAX® 110 (T568A) Personality Module
Shielded and unshielded Twisted Pair (STP, FTP, SSTP and UTP) LAN cabling:
Standard Link Interface Adapters
Cat 6A/Class EA permanent link adapters:
Cat 6A/Class EA channel adapters:
Speed of Autotest
Full 2-way Autotest of Category 6 Twisted-Pair links in 9 seconds
Supported Tests Parameters
(The selected test standard determines the test parameters and the frequency range of the tests)
Cable Tone Generator
Generates tones that can be detected by a tone probe such as a Fluke Networks IntelliTone probe. The tones are generated on all pairs. Frequency range of tones: 440 Hz to 831 Hz
3.7 in (9.4 cm) diagonal, 240 dots wide by 320 dots high, passive color, transmissive LCD with backlight.
Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage.
Main unit and Smart Remote: 8.5 in x 4.4 in x 2.4 in (21.6 cm x 11.2 cm x 6cm), nominal
2.4 lb (1.1 kg), nominal (without adapter or module)
32°F to 104°F (0°C to 40°C)
-4°F to 140°F (-20°C to 60°C)
Operating relative humidity (% RH without condensation)
32°F to 95 °F (0°C to 35°C): 0 % to 90 % 95°F to 113°F (35°C to 45°C): 0 % to 70 %
Random, 2 g, 5 Hz -500 Hz
1 m drop test with and without module and adapter attached
CSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition Amendments 1, 2
Pollution Degree 2 as defined in IEC 60664 and applied to IEC 60950 "Safety of Information Technology Equipment, 1999"
Operating: 4000 m (3048m with AC Adapter); Storage: 12000 m
Main unit and remote: Lithium-ion battery pack, 7.4 V, 4000 mAh
English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese, Traditional Chinese, Korean, Russian, Czech, Polish, Swedish, Hungarian.
Service center calibration period is 1 year
Note: all specifications for tests on twisted-pair cabling apply to 100 Ω cable. Contact Fluke Networks for information on measurement performance for cable with a different impedance.
Exceeds the requirements of Level IV as in IEC 61935-1/Ed. 3
Category 6A/Class EA link test modes (and lower link categories)
DTX CableAnalyzer far exceeds Level III requirements of ANSI/TIA-1152 and IEC 61935-1/Ed.3
Class F link test modes
DTX-1800 meets or exceeds the requirements of Level IV as in IEC 61935-1/Ed. 3.
Length for Twisted Pair Cabling
(Length specs do not include the uncertainty of the cable's NVP Value)
800 m (2600 ft) - Single-ended Test
0.1 m or 1 ft - Single-ended Test
± (1m 4%) - Single-ended Test
Twisted Pair Cabling
0 ns to 100 ns
± 10 ns
DC Loop Resistance Test
Twisted Pair Cabling
0 Ω to 530 Ω
± (1 Ω + 1 %)
Overload Recovery Time
Less than 10 minutes to rated accuracy following over-voltage. Referencing is required after repeated or prolonged over-voltage.
DTX Network Service LinkWare Report
LinkWare Data Sheet
Patch Cord Test Adapter Data Sheet
Fluke Networks Solution Catalog
The Guide for selecting and ordering Fluke Network Solutions and Products
Copper Certification Testing Best Practices Pocket Guide
Encircled Flux Application Note
How will Encircled Flux launch conditions improve my link loss measurements?
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pretium EDGE Tap Modules
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pretium EDGE Tap Modules
Datacenter Virtualization White Paper
Connectivity in the Virtualized Datacenter: How to Ensure Next-Generation Services
Ethernet In A Harsh Environment - White Paper
Whitepaper that discusses the unique issues that can arise when you deploy Ethernet in an industrial environment, and how to avoid production downtime caused by these issues.
Fiber Test Best Practices: Tier 1 Certification
Fiber Test Best Practices: Tier 2 Certification
Finding your way in the maze of industrial Ethernet standards
Six Reasons Certification Is Essential White Paper
This paper identifies the specific benefits afforded by cable certification and how much it pays back to the network owner.
White Paper: The High Cost of A Low-Cost Cable Certification Tester
The myriad of high hidden costs you may encounter when using a “low-cost” tester.
Whitepaper: Troubleshooting Your Industrial Network
Top 5 Reasons to Upgrade to Versiv
Versiv Gold Membership Benefits - Overview
Versiv Gold Membership Benefits - Overview
Versiv and DTX CableAnalyzer Gold Membership Benefits - Overview (EU)
Gold Product Support
Gold Support for your DTX CableAnalyzer allows you to make the most of your DTX CableAnalyzer purchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.
What do you get with Gold Support for your DTX CableAnalyzer and DTX Fiber modules?
|Live technical support and exclusive phone dial-in number|
|FREE Annual Calibration and Factory Refresh|
|FREE Repair with “first in bench” priority turnaround service|
|Loaner Equipment Service*|
|FREE Accessory Replacements**|
|Member Only Promotions|
|Access to Technical Support Team||Web and Email||Web, Email and Phone|
|Response Time from Technical Support||<24 Hours||<2 Hours|
|Customer Support – Phone and Email||7am-5pm (Pacific Time)||24x7x365|
|Primary Case Handling||Customer Service Agent||Technical Support Engineer|
|Knowledge Base Access|
|Product Documentation, White Paper downloads and Best Practice Guides|
|Online training Videos|
|Software and Firmware upgrades|
*Available in certain geographies currently
**Applies to accessories in the original product purchase
Annual Calibration and Factory Refresh - ISO 9001 standards compliance requires annual unit calibration. Keeping your DTX CableAnalyzer and Fiber modules calibrated is critical to ensure accuracy when testing fiber networks. Our calibration processes are ISO-9001 controlled and designed to certify that your DTX and Fiber modules meet all published specifications. To receive a loaner unit during calibration (available in most regions), we recommend you schedule your appointment 6 weeks in advance of your required calibration date. If a loaner is not required or calibration cannot be scheduled in advance, Gold customers may opt to instead receive a shipping waybill and calibrations will receive priority turnaround. Typical turnaround time for a calibration is 5 working days. Your DTX unit and Fiber modules will be precisely calibrated to factory specifications (calibration certificate provide - calibration traceable with data available for extra charge), repaired as necessary with genuine OEM repair parts, upgraded with all of the latest software and firmware then cleaned and performance verified. In addition, all accessories that came with your DTX will be tested and replaced if faulty or defective.
Repairs and loaner equipment - If your DTX or Fiber Modules should fail, we'll deliver a loaner unit via next business day delivery to keep you up and running. We'll repair your DTX or Fiber modules and replace defective accessories that came with your unit at no charge, with "first on bench" priority, and return it to you - all shipping paid by Fluke Networks.
Accessory Replacement - Some accessories are essential to testing and certifying cable. If any accessory that comes with your DTX model are qualified as defective or faulty by our technical assistance center, it will be replaced free of charge. Universal Permanent Link Adapters and Modules are limited to replacement of one set per year, provided they have met the aforementioned criteria.
Covered accessories include:
• Batteries • Channel Adapter • DSP-PM06 Personality Modules (1per year)
• Chargers • Cables • Carrying cases • Link Adapter (1 per year)
Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes priority access to our world-class Technical Assistance Center (TAC). Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night, to answer complex troubleshooting questions, including GOLD only services such as: Test set-up and instrument configuration, Fiber testing and reference setting, Test results interpretation, including trace results analysis. Let us help you get the most out of your DTX and Fiber modules and understand the results you are seeing.
Member Only promotions - Your membership qualifies you for “Members Only” promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.
Ensure that you are getting the most out of your DTX CableAnalyzer and Fiber Modules with Gold Support Services. Gold Support must be purchased for the Mainframe and Fiber Modules for complete coverage.
900 MHz and Class F (Cat 7) manufacturer’s endorsements
The top-of-the-line DTX CableAnalyzer — the DTX-1800 — supports testing up to 900 MHz. This extended bandwidth supports the ISO Class F links, as well as emerging standards like 10 Gigabit Ethernet over twisted-pair cabling. It also enables you to certify links for other applications, such as video distribution over twisted pair cabling. No other tester on the market gives you this kind of future-proof investment while meeting current Cat 5e/6 specifications.
Manufacturers are integral to the testing decisions you make. To support their warranties, your certification tests must be performed with approved tools so you can ensure your customers' complete satisfaction.
Fluke Networks has subjected the DTX Series testers to rigorous testing in the labs of leading wiring manufacturers. Click on the vendor logo below to display approval letter.
|Addison||BKS||BTR IT Connect|
These Class F (Cat 7) certification endorsements complement the endorsements for certification of Cat 5e (Class D) and Cat 6 (Class E) links and channels. Click on the vendor name to see approval letter.
|AMP Connect||BKS||CTI Netzwerksysteme|